OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
maarvold
> 3 dayMakes adding an SSD to a cheese grater Mac Pro quick & simple
-
Kayvokay
> 3 dayThis works great with my Mac pro 5,1 2010.
-
Javier Osorio
20-11-2024Great product. Works seamlessly, easy to install, it took less than two minutes.
-
Vintagemac
> 3 dayHigh quality Mac Pro drive sled, perfect to add a SSD drive to your Mac. I like the blue color. At a glance you can tell which bay is holding your new SSD. I cloned the drive I replaced and I like just being able to leave the original drive in its carrier. Makes for a great backup to my new one should I need it.
-
D. W. Francis
Greater than one weekThe only potential drawback is the color. In all other respects; fit, finish and functionality, it’s very well done.
-
Matt King
> 3 dayI should’ve more closely read the description, because it does not state that it works with 2008 MP models, but it sticks out too far to put the side panel back on. This is my 2008 MP 3,1. It’s a well made product, and actually fits the tray slot, and fits the drive just fine, it just sits out about 1/2” too long on the end.
-
Skyhawk
> 3 dayUntil Apple starts making Professional Desktop Computers again, this keeps my 2012 Mac Pro going strong.
-
raman bhardwaj
> 3 dayperfectly fits inside MacPro 5,1 hard disk slots and perfectly holds the OWC SSD hard drive. Its fairly easy to fit the ssd into the mount and just push the mount into the HD slot in Mac pro.
-
J. Repp
> 3 dayFits perfectly. Kinda wish it was silver to match the other hard drive sleds, but makes it easy to find my SSD.
-
Jimi
Greater than one weekFit like a charm
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
Related products
