PRITEK 5 inch Heavy Duty Caster Wheels No Noise Swivel Plate Casters with Brake Lock Top Plate and Wheel Fit for Table Cabinet Shelves Industrial Trailer (Bearing 1400lbs, Set of 4)
-
Rain
> 3 dayMore than I expected. These can move really well and handle a good bit of weight.
-
GatorRPh
> 3 dayBought for my workbench. Attached secure, works as described
-
Tommy
> 3 dayOf eight casters purchased, five had bad swivel bearings and three were fine. Even under near-zero load, the bad casters drag sideways across the floor instead of swiveling. This makes the casters like rigid-mount type but oriented in random directions, so the dolly would not roll anywhere. It looks like the swivel ball bearings are all in place, and they are clean and lubricated. Perhaps the press machine squeezed the swivel plates too tight, or the swivel axle is not square. Had to return them all. We buy a lot of China-made heavy duty casters, but these were the first that had serious problems right out of the box.
-
Ann B
> 3 dayGood buy
-
Aaron F.
> 3 dayI put these on a 30x 96 work bench and they work very well. Are they super heavy duty? No. Do they roll nicely and handle significant weight? Yes. I am happy with these casters for the price and would buy again. The one thing I will say is they lock easy but to unlock is harder. The lock lever is short so its hard to get my size 14 under it to pop it up and unlock but I dont see a need to minus a star over it. However if you have a bad back or limited mobility and plan on locking/unlocking a lot it might be an issue.
-
Craig R LaRosa
> 3 dayVery solid, easy lock/unlock
-
Phillip
Greater than one weekLove these locking casters they are solid, easily installed on my heavy workbench and now my workbench moves around with ease. Totally recommend these casters.
-
Ray Lambert
> 3 dayI’ve purchased several sets of these wheels. A little difficult sometimes to access the locks, but that’s minor.
-
Emed2020
> 3 dayThis is the third set of these I have purchased. Great product at a great price. I use them for workbenches in my shop and most recently for a TV stand that I use to roll a big screen in and out of the house.
-
KCoston
> 3 dayIm satisfied with the quality of these casters. They were purchased for install on my workbench. I would highly recommend them.
