[Pro Version] KIWI design VR Cable Management, 6 Packs VR Pulley System fits Quest/Rift S/Valve Index/HTC Vive/Vive Pro/HP Reverb G2/PSVR/PS VR2 VR Accessories, Compatible with Quest 2 Link Cable

I had previously bought the $20 VR Cable Management from KIWI, and Im replacing them for multiple reasons, which the pro version has improvements for: The wire - steel vs dyneema: The pro version has a dyneema wire, which is stronger than steel, more flexible, cannot rust, cannot weaken from bending, cannot weaken from twisting. These are all problems that I experienced with the thin steel wire, which broke after 150-200 hours of use, and Im confident the dyneema will handle constant movement and bending far better than steel. The cable holder - silicone strap vs rubber o-ring: The pro version has a plastic cable holder with a silicone strap to buckle the cable in. On the standard version, they give you a rubber o-ring, which you wrap around your cable, and attach to a tiny metal clip with sharp edges. The metal clip wears into the o-rings and causes them to break. On the pro version, the silicone strap is far thicker than the o-ring, and is held straight by the plastic buckle, so it cannot twist or wear down. The wall attachment is identical to the standard version, which is fine. It worked well for me in the past, and I dont mind that nothing changed. Though the standard version also used the metal clips and o-ring to attach to the wall. The pro version has a silicone loop built into the reels, which again, is much better because the o-rings can break. The overall construction is also much nicer. The reel is a custom plastic mold for the brand with a higher quality plastic, as opposed to the standard version, which looks and feels like a generic part, made with cheap materials. The higher quality materials do make the pro version quieter than the standard version, but I would not call it silent. There is still the sound of the the reel (think of how a retractable badge, or key holder sounds). I look forward to using the pro version of this product for a long time, and I would recommend anyone considering the standard version to upgrade. The standard version will work ok, but it will wear down after a while.

Keeps my cable off the floor and helps with mobility. One of the sticky pads came off the ceiling early on but I pressed it back on harder on a slightly flatter spot and so far all of them have stayed up for several months. If I had a more permanent VR space I would drill them in but these sticky pads are good enough for now.

This is just awesome. I was so annoyed with my cable and worried about how Id solve this problem considering I had a fan in the middle of my office. Of course the fan is right where I want to play.. I installed this system to the side of my fan and it allows me to stand under it where I prefer with absolutely no problems. I can walk around, turn 360, duck to the ground, etc. and the cable is never in my way.. This product is an absolute must for any VR player using a wired set. Just get it, you will not be disappointed.

These kiwi cables helps me manage the long VR cable that I have for my HP Reverb G2, and honestly with out these cables I would probably be tangled very often while attempting to use my VR headset. My main gripe with the product is its sticking pads; when attempting to take these pads off your ceiling, proceed with caution, since the pads themselves will strip any pain they touch.

I use these for every headset I have. I have tried tons of different cord management options for VR and these are the best. These provide plenty of suspension, are easy to adjust for different heights, dont pull to hard, and are silent. I have yet to have one of these fail and I run an arcade that puts them under heavy use.

This pulley system was an affordable way to get the 16’ USB cable out of the way when playing VR. I’ve had the system for ~6 months and it’s held up well to my 12yr son’s Gorilla Tag and other, active VR games as he moves all over his room without any worry about yanking the cord out of the computer or the headset. Simple installation. You just twist a few screws into your ceiling to guide the wire and you’re done.

High quality product might be a little bit too sticky as if you have to move one due to misplacement it will rip the pain off the ceiling but dont have to worry about them coming off the ceiling while gaming

If you are looking for something as a starter into this whole VR Pulley system, you can purchase this until you get something better. I say this because while it is good for its price, there are quite some downsides to this. For instance, the adhesive clips that go on your ceiling will end up leaving a mark once you remove it (you are better off drilling up there or using 3M command strips instead). Like most people said, it also feels like you are tugging with the wire as you play in VR, so it doesnt give that freedom feeling to it. The tugging tends to ruin the experience. Although I was happy with my purchase at the time because I no longer step on my headsets cable anymore.

I’ve bought these things over and over again they are my go to for a vr pulley system

This functions great as a product to keep cable weight off ones self, but if you are a more ambitious VR enthusiast these are recommended with caution. I have a standard ceiling and I had a handstand go wrong with my foot getting caught in the line. All would have been fine but the length of the system does not reach the floor and caused a mishap with landing. The cable management broke and I have a damaged foot. Also the pull of the cables is on the weaker side and I would recommend about 9 if you want a taut system.