Radar Detector Hardwire Kit,Direct Wire Wiring kit for Escort Valentine One Uniden Beltronics Cobra Radar Detector Quick Connection Plug and Play Power Cord Cable(13FT RJ11)

Everything you need and then some.

This product was easy to install. The wire was more than long enough for my car and reached all the way to my rear view mirror for a nice and clean set up. Highly would recommend this set up if you don’t want your car battery to drain and want to keep your cigarette lighter port free of plugs. Just make sure this is the right connector for your radar.

Good quality product, everything you need and then some. Easy install in 2013 Audi A6. Literally 10 minutes.

East to install and hides the wires so they are not in the view/way looking out the window

This is the hardwire kit to get! Everything you need is included. Make sure you plug the new (included) fuse and the existing fuse (if there is one) into the proper slots.

I installed this in my E90 yesterday. There are a few such kits out there but this one gives you every common fuse connection type and the most cable length and its still well priced. It also includes a 5A fuse of every size, some replacement inline fuses, a few zip-ties, and even a trim pry tool! For easier cable routing by just tucking it behind some panels / molding without prying on anything, if you have any problem with the cable walking itself out over time, wrap some double-sided tape around it every 6 inches and tuck it back in. Go ahead and ground it first, but dont plug it in til the rest of its installed - dont risk screwing up and popping the one fuse they gave you. My only complaint with this kit is it could use just a few detailed instructions. Obviously it cant tell you how to route it in your vehicle or which fuse slot you should put it in. But it should tell you about the add-a-circuit system they have here: Now it helps if you have a meter on hand to verify the connections. Having done that I found the reason it has two fuse sockets on the connector is because the one closer to the fins is for an existing fuse, and simply lets that fuse sit in the circuit same as before, while tapping one fin to supply voltage to the radar detector through the 5A fuse you add. This way your RD is on its own (fused) circuit, and you dont need an empty fuse socket (although thats still ideal). Just be sure to find a fuse which isnt energized til key-ON! Or accessory if you want. Its your battery, do what you want. I would recommend this kit. I cant believe how long I used the coily cigarette-lighter cable.

wired right up! spent a day running errands with it installed and the detector didnt power cycle or shut off on its own.

Total garbage, the feed lines are barely there, pull to tight to feed the Laine and it splits. Stay away from this dangerous garbage.

Very easy to install. Perfect fit and well built. Works great with my Uniden R7.

Easy peasy install. Effortless accessing a power source. Wire is well hidden and ready for use when I get in my truck.