RIGOR 11731 Impact Socket Adapter and Reducer Set | 1/4-3/8-1/2 Impact Driver Conversions, 4 Piece Set, 2 Adapters, 2 Reducers | Chrome Molybdenum Alloy Steel (CR-MO) | Quick-Fit for Hog Ring Anvil

A good set to have in with your tools. For the moments when, you need to get at something from a bit of an angle. The entire set with rail weights only 9.7 ounces. This set includes: 1/4, 3/8, 1/2 drive plus the storage rail. All 3 tops have chamfered edges with a spring loaded detent ball. Rotation of the top is a full 360° The base has a pair of drive holes at the bottom. In silver lettering across the drives is: RIGOR name, a box with drive size, model # and CR-MO in white. The set are made of Chrome Molybdenum Alloy Steel and have a manganese phosphate finish. Storage Rail. The ends have black rubber caps that can easily be removed. Then you can slide off any of the three adapter holders, arrange them the way you need. The holders are yellow and also have spring loaded detent ball built in. The aluminum rail is black with RIGOR logo in white. Attaching or removing the adapters is the perfect tension. Not difficult to remove and not falling off. Right in the middle. Mainly I use the 1/2 adapter the most, as most of my impact sockets and tools are at this size. The set includes a lifetime warranty. Can be used with a wide variety of tools. Would like to see the drive size printed just a bit bigger. The adapters worked great with all of my tools, with no issues. No signs of wear and are well constructed. Should last. Great price and would recommend. Hope this was helpful.

great no binding, or breaking

I have always used the regular old fashioned swivels and hate them even if not using an impact on them because they are just floppy and when tight angle the will bind up. These take care of that problem. They are nice and tight and do not bind up when at an angle. The spring loaded balls hold sockets fine and have not had any problems with these swivels as of yet but of course time will tell. Oh yeah the included aluminum rail is nice and well made. Usually I toss the included rail but this one is actually well made. Hope this helps and thanks..

This is a great set of swivels for impacts. Many impact swivels are so overpriced they just arent practical for a backyard mechanic. I saw these though they would fit my needs. I take care of all the family vehicles since I was a mechanic for many years. These are as good as any I have used. At this price, anyone with an impact wrench should get them. Just to put it in perspective a single Snap-On 1/2 swivel is about 75 bucks. These will do the same thing as that does. I mainly use the 1/2 for suspensions and the 3/8 for front end work. I like the hex design. It is basically a Bondus end, which has been proven for many years. I dont see me ever using the 1/4 for impact but as just a regular swivel, yes I will. I hope you found this review helpful.

These universal socket adapters are a great addition to my toolbox. They are durable and come in handy for those stubborn and hard to reach bolts. They are strong built and have held up on an impact wrench. I would recommend. Thank you for reading my review I hope that it was helpful to you.

Works as advertised.

Let me start off by saying - this review is in no way compensated by anyone, i did not get these for free, i did not get the price reimbursed for leaving a positive review, I broke my old craftsman 1/4 universal joint and went in search of something stronger. After some research i decided to get some pinless universal joints. These are advertised as being made in Taiwan, but there is no marking on the universal joints themselves. Quality seems solid compared to most of the big name brands out there. The detent hole is drilled all the way through the socket (See pic) which is nice compared to some that have it only drilled through 1 side. The detent ball is strong and the machining is well done. No rough edges. I dont have any way to measure the angle, but it looks on par with my other universal joints (its better than it looks like in the pic) The holder is aluminum with the yellow piece being plastic. I paid $20 for the set of them and given as the gearwrench was something like $45-50 for the same thing. Tekton doesnt offer a 1/4 and some of the other brands looked very bulky or were just as expensive as a name brand. The 1/2 seems a little less smooth than the other two, but it doesnt effect performance so i really dont care. They came well packaged in a bag inside a sturdy little box. Overall im happy with them. Ill update the review if i run into any issues later on.

If youve never used a pinless universal joint, youre in for a treat! The ones with pins work but can be easily bound up at too steep of an angle. Pinless style, like this, significantly reduce binding at steep angles and work a lot better. This set is holding up well so far and not showing any real signs of wear of the metal getting dented, bent, galled, or deformed. Seems that these will stand up to a lot of use in impact tools.

These are great! They are just as advertised and I have only raved about them. The seller listing on these is 100% accurate. The sturdiness is comparable to any more expensive tool available. I was extremely pleased with how well they fit my impact and worked flawlessly. Having 360 degree rotation makes them perfect for just about any space. The included storage rail was a really nice bonus! It made it so easy for me to put them up and keep them together.

I love the idea of this product. It’s simple and so convenient, not something you HAVE to use ever time, but an option. I love that it feels hefty, feels very sturdy and durable. The brand and the color looks appealing, but also how it’s a set of three (3). Being a set of three (3) I immediately fell head over heels for it because I wanted to try it out Ultimately, the downside to this is that the swivel part feels almost as if it’ll pop right out of the base. It’s showing a little too much slack, but at the same time, this shouldn’t be used when loosening a bolt. It should be used in combination after breaking the bolt loose with a breaker bar. Still, I’d recommend this product.