Rockford Fosgate P500X1BD Punch 500 Watt Class-bd Mono Amplifier
-
Nate S20FE
> 3 dayRockford-Fosgate has been in my car amp lineup since the 80s. Ive never had a failure or performance issue and they are rock solid and CLEAN! Bought this one for my son for a Christmas present to match up with our professionally home built 15 sub and it sounds fantastic! Rockford-Fosgate continues to hit the mark for performance, quality and value.
-
Cody Hastings
> 3 dayThis is typical Rockford fosgate greatness. Every fosgate product Ive ever bought was nothing less than perfection. This amp was a great deal for the money and it was more than enough power for my subwoofer. I would recommend this amp to anyone.
-
J. Woitschach
Greater than one weekMatch this with one subwoofer DVC 2-ohm wiring to 1-ohm load or a pair of subwoofers DVC 4-ohm wiring to 1-ohm load to get the max power of this amp. Great amp.
-
hemitruk
> 3 dayNice clean base even at lower volume .Combined with remote level control even fm radio sounds good now.
-
John B.
> 3 dayThe amp was awesome for a month. As soon as my return window closed, the amp started messing up and no longer works. I should have paid the extra $100 to by direct from Fosgate! Oh and now the seller avSounds is out of business! No wonder!
-
Dalton B.
> 3 dayPurchased this amp along with the Rockford Fosgate Punch Remote Level Control and an InstallGear 4 Gauge Complete Amp Kit. Works flawlessly! I installed it in my 2004 Jeep Wrangler TJ along with two Kicker 2010 Comp Series C10 4 Ohm 10 subs and one Kicker CompRT 2 Ohm 6.75 sub. Works great and made all my Kicker subs hit way harder than they did with my cheap BOSS Audio amp I had until I could afford a better amp. I love how the adjustment dials for this amp are all hidden under the cover so I never have to worry about them getting messed with. The instructions it includes are also very detailed for the initial setup. Rockford Fosgate continues to impress me!
-
Miss Fabiola Brown DDS
Greater than one weekBirth sheets reads 805 rms @ 1 ohm . And it puts out tht. I have it powering one p3. And damn. The whole block knows when im coming. Rockford is the best. And they play no games with their s***!
-
Edmund Jerde
Greater than one weekI like it a lot and would buy again had no problems
-
Prof. Abner Hilpert V
> 3 dayBass is Rockford 12 and it sounds awesome. Worth the $$
-
WAKIII
> 3 dayI hooked it to P3 10 inch dvc subwoofer. The amp is running 742 watts to the speaker on a 1 ohm resistance. Rockford Fosgate is quality, reliable, and affordable. I always have and always will rate them number one overall. It is an American based corporation. If a person wants to spend money on audio equipment it should be from a name brand that has a history of offering a selection of merchandise that will please any audiophile at a price well worth paying!
Power & Bass On Demand!
P500X1BD
The Punch P500X1bd is a mono amplifier capable of producing 500 Watts into a 1-Ohm load.
Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only.
With its super efficient Class-BD circuit topology, the P500X1bd will drop some serious BASS! The stealth top mounted control panel not only provides a sleek finished look to the amp, but it also protects the vital controls.
Our custom heat sink design uses high aluminum mass where it is needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand.
- Punch 500-Watt Full-Range Mono Amplifier
- Rated Power: 150 Watts x 1 @ 4-Ohm OR 300 Watts x 1 @ 2-Ohm OR 500 Watts x 1 @ 1-Ohm
- 12dB/octave Butterworth crossover
- Power Wire Gauge: 4 AWG
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Optional Punch Level Control Ready (PLC2 sold separately)
- Recommended Fuse (not included): 80 A
- Dimensions (H x W x D): 2.38" x 7.76" x 11.03"
C.L.E.A.N. Set-Up
C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is our patented circuit with in/out clip LEDs to help match a source to amp and optimize output
Punch EQ
Delivers more bass where you want it most by allowing up to 18dB of boost adjustment at 45Hz
Multi-Signal Inputs
The RCA inputs of this amp can accept both Hi or Low level audio signals without the need of a signal converter
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| P1000X1bd | P500X1BD | P300X1 | P1000X2 | P500X2 | P300X2 | |
| Number of Channels | 1 | 1 | 1 | 2 | 2 | 2 |
| Total Power (RMS) | 1000 | 500 | 300 | 1000 | 500 | 300 |
| Bridgeable | No | No | No | Yes | Yes | Yes |
| Circuit Topology Class | Class BD | Class BD | Class A/B | Class A/B | Class A/B | Class A/B |
| Cooling | Convection | Convection | Convection | Convection | Convection | Convection |
| Recommended Fuse (not included) | 140 A | 80 A | 50 A | 140 A | 80 A | 50 A |
| Dimensions (H x W x D) | 2.38" x 7.76" x 13.28" | 2.38" x 7.76" x 11.03" | 2.38" x 7.76" x 9.86" | 2.38" x 7.76" x 15.03" | 2.38" x 7.76" x 13.28" | 2.38" x 7.76" x 9.86" |
| Rated Power | 300 Watts x 1 @ 4-Ohm | 150 Watts x 1 @ 4-Ohm | 200 Watts x 1 @ 4-Ohm | 300 Watts x 2 @ 4-Ohm | 150 Watts x 2 @ 4-Ohm | 100 Watts x 2 @ 4-Ohm |
| (or) | 500 Watts x 1 @ 2-Ohm | 300 Watts x 1 @ 2-Ohm | 300 Watts x 1 @ 2-Ohm | 500 Watts x 2 @ 2-Ohm | 250 Watts x 2 @ 2-Ohm | 150 Watts x 2 @ 2-Ohm |
| (or) | 1000 Watts x 1 @ 1-Ohm | 500 Watts x 1 @ 1-Ohm | 1000 Watts x 1 @ 4-Ohm Bridged | 500 Watts x 1 @ 4-Ohm Bridged | 300 Watts x 1 @ 4-Ohm Bridged |
|
|
|
|
|---|---|---|---|
| P600X4 | P400X4 | P1000X5 | |
| Number of Channels | 4 | 4 | 5 |
| Total Power (RMS) | 600 | 400 | 1000 |
| Bridgeable | Yes | Yes | Yes (front/rear channels) |
| Circuit Topology Class | Class A/B | Class A/B | Class A/B + Class BD (Sub) |
| Cooling | Convection | Convection | Convection |
| Recommended Fuse (not included) | 100 A | 60 A | 150 A |
| Dimensions (H x W x D) | 2.38" x 7.76" x 13.28" | 2.38" x 7.76" x 11.03" | 2.38" x 7.76" x 15.03" |
| Rated Power | 75 Watts x 4 @ 4-Ohm | 50 Watts x 4 @ 4-Ohm | 75 Watts x 4 + 150 Watts x 1 @ 4-Ohm |
| (or) | 150 Watts x 4 @ 2-Ohm | 100 Watts x 4 @ 2-Ohm | 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm |
| (or) | 300 Watts x 2 @ 4-Ohm Bridged | 200 Watts x 2 @ 4-Ohm Bridged | N/A + 500 Watts @ 1-Ohm |