













Rubber Sheet Warehouse .125 (1/8) Thick x 4 Wide x 10 Feet -Neoprene Rubber Strip Commercial Grade 65A, Smooth Finish, Solid Rubber, Perfect for Weather Stripping, Gasket, Costume & DIY Projects
-
Jt
> 3 dayThese do the job but they have an intolerable odor. The closet I kept them with I developed a horrible smell. I wonder about the toxicity and off-fading of this product. I am throwing it away. Also the surface has a sandy, grainy feeling. Avoid…
-
D. Harrs
> 3 dayGood product.
-
Michelle L.
> 3 dayI repainted weight racks and wanted to protect the area the weights rest on. I needed 6 foot strips, ranging from 2 to 4 wide - it was most cost effective to buy the large roll and cut the strips I needed. The rubber did have a smell, but it always will at first and then goes away eventually. The roll measured just over the size I ordered (both length and width) and the edges were cut straight. I marked with a pen (and could see the line) and cut with a razor blade (my cuts were straight enough). I scuffed the painted surface then cleaned it and the rubber strips with rubbing alcohol. Youll need plenty of ventilation and a mask when using Contact Cement (I used Dap Weldwood). Just brushed it onto both surfaces, waited about 20 mins, and then laid the rubber strips on the rack. The 6 ft long strip were flimsy, so two people were needed to lay it, we tried not to stretch it but every strip we laid had to have the end length trimmed again (maybe 1/4 in to 1/2 in - which we cut off with a scissors). It was not instant contact, we could pick it up again and reset it - and the final contact stayed firm. We put the weights on right away (5 lbs through 120 lbs) and it looks good and I expect it to be durable.
-
Vlad
Greater than one weekI use this rubber to repair my sandals. The sandals feel comfortable, and I prefer to repair sole damage, rather then to adjust to new model. Original SuperGlue works fine. Rubber is not as durable as I expected.
-
Ed O Waldroff
> 3 dayI used the rubber sheeting to replace the water splash guards on the sides of my truck motor, it worked great after I trimmed it to match the original guards that needed replaced,Thank you . this 1/8 inch thick rubber sheeting was hard to find except for you;
-
Adam Brubaker
Greater than one weekI was chopping it up to use as a buffer between two things so...yeah it works for me.
-
Prof. Tod Raynor Sr.
> 3 dayIts a bit less durable than Id like. If you put a hole in it to attach it be careful not to tear the hole open by using over sized washer or large head screw.
-
Ernesto ochoa
Greater than one weekWorks great for my application. Very rigid
-
TRUTH
> 3 dayBetter quality then expected nice rubber !!!