

Rust Treatment, 1 Qt Btl, Opaque
-
Chuck W.
> 24 hourEasy to use, dries quickly to a black surface you can paint, or if a floorboard as in my Heeps case, just cover with Dynomat and carpet (after you fix the leak!)
-
David Prive
> 24 hourWorks great
-
Michael Novota
> 24 hourThis stuff is great and will do as advertised but works really well if you knock the surface rust off with a metal brush. Putting this on non-abrasively attacked rust will yield a less than optimal finish. If you knock the surface rush off and then apply Loctite to non-fully oxidized metal it will create a very dark grey to black layer with will seal the surface from oxygen/water. It worked so well after sanding the rust a little that I almost did not paint over it. I have used this to coat and treat all my equipment in my work space in a humid environment and it works really well.
-
JD DR
> 24 hourWow! Great product, great price, great vendor = Great DEAL! Im impressed! Thanks!
-
David C Martin
> 24 hourAs usual any Loctite product performs fantastically. this took all of the rust on my yard wagon and converted it to a stable paintable surface, just follow directions on the bottle. I put Lowes herculiner on the inside bed and it has performed fantastically. it has bonded very securely to the rust treatment finished surface. Highly recommend this product.
-
Richard A. Schnitzler
> 24 hourIve used it before its great stuff
-
JKrueger
> 24 hourThis is the ONLY stuff for treating rusted metal (also a matching Henkel product- just match the 75430 number). I used this decades ago working on cars, where I would then apply glass cloth/polyester resin/bondo over the area for rust repair (when I was young and poor and couldnt afford new metal...!). It helped the repairs last much longer. I am now repairing a rusted storm culvert on my pond, and tried a number of products from HD and Lowes that were a complete waste of time. For best results, knock/scrape/wire brush loose rust and layered scale off the area to be repaired, and use a motorized wire wheel to really get down to it. Clean the area with solvent like enamel reducer, lacquer thinner or Xylol before applying- this is a water-based product so it can be repelled by dirt, oil or grease. Youll see those little divots as you apply it- just keep working the material, itll cover. Use two coats. Bless Amazon for making the real thing so easy to find, and easy to get.
-
Jon L. Fessler
> 24 hourGreat for old car restoration
-
Patricia Sam
> 24 hourworks wonders
-
Chuck F
> 24 hourWe used this product in the paper manufacturing industry on rusted/ corroded internal components of process equipment. It reacts with (rust) to form a tough primer coating and cleans up with water. Extend performs well. It’s not “cheap” but worth the money. I had to have some at home so I found some on Amazon. I’m sure that other similar products are available, but I know that this product can withstand the harshest conditions.