S SKSTYLE Vertical Laptop Stand Holder, Desktop Aluminum MacBook Stand with Adjustable Dock Size(2 Slots), Fits All MacBook, Surface, Chromebook and Gaming Laptops (Up to 17.3 inches), Black

I have a 14 Dell laptop provided by my workplace and my personal 14 MacBook Pro. For my desk setup I have a Samsung 49 ultra wide that I have connected to a Dell Thunderbolt dock. This stand fits nicely right on top of the Thunderbolt dock allowing me to easily switch between plugging in my work laptop or my MacBook and being able to utilize all of my peripherals between the two machines. Cable clutter is cut to a minimum and theres plenty of free space on my desk now that it is not being taken up by laptops. The stand also looks nice and has a good weight to it being entirely made up of metal. The slots that hold the laptops are adjustable with a set screw on the bottom and have silicone pads on the inside so that your laptops wont get scratched.

My previous stand worked for my mid-2015 Macbook Pro because both the laptop and stand were slightly curved around the edges. But the newer Macbook Pro does not have a tapered edge so it sat awkwardly in the old stand. This stand is flat and is wider so it cradles the laptop much better. Its heavier as well so it has more stability. Im able to fit both laptops in there comfortably without any issues. Definitely a good choice whether you have one or two laptops.

I use this for my 16 MacBook Pro and 12.9 iPad Pro. Keeps it upright and sleek looking.

Talk about bang for buck!!! Like many who work from home, I have two laptops, one for work and my personal. Since I use them often, I had to get two separate stands for them. I wasn’t happy with the space both were taking up on my already small desk space, but it was not until I was rushing out one day and knocked the laptop closest to the side to the floor I knew I had to do something! When I saw this stand I figured why not give it a shot, and my was it love at first sight! It does come with an key to adjust the stand, but for me out the box, I didn’t need to adjust anything. I have a MacBook 16” pro and a MacBook air 13”, they both fit nicely and the heat is distributed nicely that I dont have to worry since the space between the stand in decent. Its sturdy and clean looking aesthetically, now I get to save space on my desk, not have to run cables all across the table and still be able to quickly pickup any computer if I need to dash off and work off station. More importantly no knocking it to the ground ha ha

Sturdy and functional. Love it.

This stand works beautifully and has a smooth nice finish. It has a lot of weight to it, and a large foot-print, both which help make it more stable. The entire base is lined with a soft rubber that feels very durable and protective. The sides of the walls that contact your devices are also lined with this rubber so your devices feel secure and protected as well. An allen wrench is also included if you need to adjust the space between walls to hold thicker/thinner devices or perhaps hold more than one device in each space. I like that the adjustment is hidden underneath to not interfere with the aesthetics of the clean design. With my desk-space being limited I greatly appreciate how much surface area is freed up by storing my laptop and tablet this way.

This solid and stable aluminum stand holder has soft silicone pads to protect the inserted devices. The clamps can be adjusted by the screws underneath the holder. Overall, it is a stable, solid and attractive stand holder that can be used for any purpose that needs a vertical stand.

I have 2 very large laptops (one of them could sprain your wrist if you dont lift it properly) and they were taking up way too much space being stored in an ugly magazine rack for the past few years. Not to mention, I dont think its good to store the machines on their ends like that (see the last picture for an example of the old storage solution). This lil guy is a sturdy metal, with solid screws, and an allen wrench (included) for adjusting the slot width. Thats a good thing, because one of the machines is about twice as thick as the other, but since the slots are now custom fit they are securely seated in the holder, but still pull out easily. The bottom has a non-slip, non-scratch foam surface that adds another layer of security and distances the screws from the tabletop - the designers thought this through! Im looking forward to getting a second one for my other machines - now that I see I have loads of space left on this tiny table!

This is a great way to store your laptop or tablet without taking up tons of space. I used this to store an iPad in a sound booth where there was limited space next to the sound board. Between the weight of the stand and the grip, it holds on to the desk really well and makes it easy to put the iPad in or take it out without moving the base. The slots are narrow enough that you dont have too much play side to side when the iPad is in the base which means the grip on the sides of the slots can do their job to keep the iPad from slipping. All that to say this stays in place and keeps whatever you stick in it in place well enough that I dont mind having it close to the edge - it isnt going anywhere. I do wish there was a way to store the Allen wrench for adjusting the slot width though. It wont be the end of the world if I lose the Allen wrench but a small groove in the bottom or a hole on the end to store the wrench would be fantastic. But given that I dont think Ill need to adjust this often and that it uses a standard tool, Im not too worried.

Ive been wanting one of these storage organizers for a long while but the ones I was coming across were too expensive. This price is just right for me. It arrived well package and was simple to setup. For my two laptops I didnt even need to adjust the sizings, though I was releived to see that it was an option. They fit perfectly and I have no fear of them falling or getting knocked over. The base is pretty heavy and well structured. As stated, I have this for two laptops, but you could easily use tablets in the slots as well. I like that you can swap out needs pretty easily. This has freed up a lot of my desk space (while still making my desk look nice and professional). Im happy for the extra room. Nothing not to like about this holder!