sb components Raspberry Pi 3 Model B+ Transparent Case - Access to All Ports

This arrived well packaged and in a professional manner. It was shipped pretty quick and all the service I had was good. The first thing I noticed is that it was quality made, and how clean the clear plastic pieces were. Some times, when plastic pieces are removed from the molds, plastic strings and mold marks are present. But not with this piece, you can tell that it was well made and a lot of pride taken when it was removed from the mold. This was a straight forward install for me, and I really like how clear it is. I can see all the things I wanna see clearly ( see the photo below ). It was easy to figure everything out and how it all worked. All the slots are correctly located, for those engineer/nerdy types, all the slots have no more than .015 of an inch clearance, but everything is perfectly located. I use a name brand computer to place inside it, one that I know is right. After I placed the unit inside, placed the halves together, it snapped together perfectly as intended. Id say you wont go wrong with this unit, it might cost a little more, but what is a few cents when you get good quality. This is by all means a premium product. I will disclose that I am a very honest and unbiased reviewer. If you like my review, or found it helpful, please click the helpful button below.

Bought this for the RachelPi project. Made an offline internet incase the internet goes down someday. Somewhat of a prepper type project but better safe an sorry.

I use these cases to help keep the Raspberry board clean. No screws for mounting the board are supplied and the required screws are a bit of an odd size. I cut down longer #4 plastic screws.

I cant find anything I dont like about it. It looks good. The RPI 3 snapped right in and the two halves fit together properly. It couldnt be easier to assemble. The board is secure, no rattling if you give it a shake. The cutouts for the 3 IOs (Display, camera and GPIO) all seem well enough aligned, although I am not personally using them on this build, so they act as ventilation for me. Good buy if you are looking for a case for a RPI 3 you already own, or if you wanna save a few bucks vs one of the bundles that includes similar cases like I did.

Very nice. Has screw-mount holes underneath PCB. Also has hole for rasp-camera flat cable to protrude thru top of case. Very nice, well thought out. Snaps together and holds nicely; sturdy. Will buy more, if I dont get the all aluminum case from Flirc first...nice being able to see-thru the case. Foolishly bought several of the original rasp pi 3 cases, which are shockingly flimsy, snap-together toy-like junkies with 5 individual pieces....pretty much the dumbest thing Ive seen yet, really making rasp pi feel like a cheap toy. These cases, in contrast, are what should ship with RP3.

I ordered this case for a proof-of-concept magic mirror project I developed for a demo at a tech conference. After trying several options (including hot-glueing the Pi directly to the mirror frame), I decided to get this case. I have a Pi 2, but, the slots all lined up perfectly, anyway. The plastic is nice and sturdy and relatively scratch resistant. There is a slot for inserting the camera (which Im using on this project). You can easily attach leads to the interface connectors, but, I dont think most HATs would work. Theres even a little window that makes it easy to remove and add the micro SD card. All of the connector holes are precisely positioned and just big enough to allow a good connection while still maximizing protection. My favorite feature of this case is the ability to snap the Pi in without having to attach with screws to the case. I have been doing some work on the prototype that has required a lot of moving about while reconfiguring the mirror and Ive had to remove the Pi on several occasions after attaching the case to the mirror frame. All I had to do was unsnap it and snap it back in. Because I use hot glue in prototyping, I was worried that the case would melt, discolor or deform during the glueing process. It turns out that was no problem at all. I glued the case to the mirror frame and, now, I can snap the Pi in and out as needed without bothering the case.

And the clear case allows you to see all the status lights.

I bought 2 of these and will buy more when I need them. I sometimes take for granted when things just do what they are supposed to, and Id probably not have reviewed these had Amazon not prompted. For the price these simple transparent cases are just what I was looking for. One feature I appreciate is the keyhole slots on the back are dual-sided, that is they can be mounted in either vertical orientation. Nice feature for me.

This is a great clear 2-piece snap together plastic case for the $5.xx price. I love being able to see my Pi 3 B sitting securely in its case as Im surfing the net. This is one of the very few cases that has a very ample opening for the GPIO. This allows for easier access for connectors as well as the secondary benefit of a larger opening for heat exchange/dissipation. This item does not have heat sinks or screws to secure the RPi, though 3 clips in the lower section help hold it in place. It did come with 4 tiny rubber pads for the bottom.

I was looking for a non-aluminum case that had proper wall mounting screw holes. IE the screw heads are protected and wont accidentally contact the board. Its pretty hard to discern that from the product descriptions. This is a simple plastic snap together case that has the cross type holes for wall mounting and there is plastic behind the holes. IE the screw head will contact plastic instead of the motherboard. Works great.