StarTech.com 2U Wall Mount Network Rack - 14 in Deep (Low Profile) - 19 Patch Panel Bracket for Shallow Server, IT Equipment, Network Switches - 77lbs/35kg Weight Capacity, Black (RACK-2U-14-BRACKET)
-
G. Brown
> 3 dayI am sure this will support more weight not sure if you have room for it. 1. Heavy duty steel with folded edges 2. Not enough Rack screws to mount 6 1U devices.Only come with screws for 3 (12). So add in another 6 bucks for more screws. 3. The supplied drywall anchors are the plastic self driving type and I would not really trust them to support expensive equipment. Look for studs or attach a board to studs then this to the board.. 4. The top bar is not 100% necessary and can be moved to the bottom as the unit has no top or bottom, the mounting holes have slots in both directions. I had the rack full so removed the bar. Attached directly to concrete block for me this should hold a great deal more than 40lbs. Besides the poor mounting hardware and lack of additional screws this is a great product.
-
Jeff B
> 3 dayRack is very solid and easy to install. I have filled the rack and it’s very solid with no movement. Great value for the money. I would recommend different drywall anchors.
-
Halle Haag IV
> 3 dayGreat Purchase will buy again
-
Martin
> 3 dayPerfect for small office network setup. Using it to hold rack mount keystone patch panel, network switch and power bar. I use two 10 rack mount shelves to hold other small equipment that cant be rack mounted.
-
5star
> 3 dayBought this and set it up but this only came with 12 Screws and screw Clips. Not enough to mount everything. Now have to find Mounting Screws and Clips to finish Installation. Should have been Stated in description that it was needed as it is putting my project behind schedule and costing a little bit more. I expected More from StartTech
-
Allan
> 3 dayThis rack overall is fine. Its not the sturdiest rack and you really need some good sturdy devices mounted but for the money its fine. I used it with some AC Infinity Vented Cantilever shelves and with those it was rigid enough where I wasnt worried about too much warping. Next time around though I will probably get something a little more solid.
-
NandoN2k
> 3 dayGreat product for is price. Install in my closet. Works great with my camera setup and backup.
-
Johnnie
> 3 dayIts a pretty simple rack and its not that expensive. Easy to setup and is pretty sturdy
-
Michael J. Scharmack
> 3 dayPlaced my network in the garage and wired everything up. Works great.
-
Beth Salisbury
> 3 dayInstalled for over 3 months. So far everything works great. Is almost full and holds everything secure.