SUNLU 3D Printer Resin, 1kg Fast Curing Standard 3D Resin for LCD DLP SLA Resin 3D Printers, 395-405nm UV Light Curing 3D Printing Liquid Photopolymer Resin, Low Shrinkage, High Precision, 1000g, Grey
-
The Mechanic
> 24 hourI used this resin in phrozen sonic, works very well on default settings. Flows well, very good resin. Ive only been 3d printing for about 2 & half months good for beginners
-
Schaefers Cookhouse and Cabins
> 24 hourI think that means its his favorite birthday gift.
-
Masha Chaney
> 24 hourThe smell is there but not tooo much...
-
Jess
> 24 hourGreen is slightly darker then the photo image. Be away depending on printer exposure times will need to be increased. Also to much increase will result in a tumor growing on the base facing your results until you build enough layers to counter the refraction happening through the translucent. Overall alittle tricky to get perfect but once it’s dialed in and if you can afford to put your object right on the build plate it printed fine. If your looking for dimensional accuracy this might not be your choice but if it’s just an interesting object this green is incredible nice. I also mixed it with there translucent blue and a translucent red at on point with great success.
-
SierraTech
> 24 hourI purchase 5 different 1000g bottles of this resin, ALL 5 failed to print the bottom layers correctly. I tried the settings on the bottles and on Sunlus website, and all kinds of settings in between. I even contacted Sunlu and sent them screenshots of my settings and they came back with You can try setting the exposure time to 3s which is one of the settings I tried and sent them a screenshot of! SO I wrote back pointing out that I tried that, and it was in one of the photos I sent them and they wrote back The main reason may be caused by exposure time. If you need a refund, you can contact the store.! (Terrible support experience). I really wanted this resin to work, the price was right and the colors are perfect for what I wanted to use them for. I am using a Elegoo Mars 2 which I have had no problems with ever, with any resins Ive ever ordered. It looks to me like excess resin is curing beyond the models edges, I even reduced the bottom exposure times below their suggested minimum of 20 down to 10 seconds with a normal exposure down to 2s and still got the hole at the bottom of the model filled in with lumps of cured resin. UPDATE: I dont think there is anything wrong with this resin. After talking with Elegoo they explained ALL transparent resins will have anomalies like extra exposed resin beyond the boarders in Cavities, especially on the bottom layers because the light bleeds through the transparency of the resin. I tried another brand and had similar problems. However, you would think that Sunlu, being a printer and resin manufacturer would know this and explain it to me rather than throw silly suggestions out there of common things I already tried just to get rid of me. Im adding a couple more stars for the resin as it produces beautiful results as long as the bottom doesnt have cavities or you require critical specs on something like parts that require precise measurements. As far as their Tech support, dont count on it.
-
Pepe
> 24 hourDark grey and grey works great and are high in detail. Quickly was able to calibrate exposure time 1.6-1.8 normal layer time is great. The colored resins for me have always become grainy after a couple of print for some reason. Would not recommend those.
-
M.M.
> 24 hourOut of the 5 bottles I have gotten, one seemed to be a different formula with more flexible final prints, but slightly lower print quality. The others so far have produced results on par with Elegoo resin. Ill probably keep buying this as my resin of choice for every day prints, as long as I can get it on sale. If its close to the price of Elegoo resin Id just as soon get Elegoo resin. My printer is the Saturn 8k.
-
ben zion chen
> 24 hourGOOD
-
Johnny juarez
> 24 hourThe resin worked perfect it was fast curing and work for the project I was needing it for
-
Ray H
> 24 hourI notice that the resin separates easily if you leave it in the vat for any amount of time after printing. You have to mix it up before printing again. This might be caused by the temperature in my basement, which is around 68 degrees fahrenheit. The prints that I have done feel very brittle and prone to breaking/chipping, especially thinner or point parts. The quality seems comparable to the Elegoo 8K resin which costs twice the price. Overall, I prefer the Elegoo 8K resin, but Im turned off by the price. I dont think I will buy SUNLU resin next time. Ill try another brand. Printer: Elegoo Saturn 2 8K
