SUNLU 3D Printer Resin, 1kg Fast Curing Standard 3D Resin for LCD DLP SLA Resin 3D Printers, 395-405nm UV Light Curing 3D Printing Liquid Photopolymer Resin, Low Shrinkage, High Precision, 1000g, Grey
-
BD0G
> 24 hourPrints well.
-
Donny Wisoky V
> 24 hourGreat quality, great price, great goo!
-
Jess
> 24 hourGreen is slightly darker then the photo image. Be away depending on printer exposure times will need to be increased. Also to much increase will result in a tumor growing on the base facing your results until you build enough layers to counter the refraction happening through the translucent. Overall alittle tricky to get perfect but once it’s dialed in and if you can afford to put your object right on the build plate it printed fine. If your looking for dimensional accuracy this might not be your choice but if it’s just an interesting object this green is incredible nice. I also mixed it with there translucent blue and a translucent red at on point with great success.
-
Jovanni hiscox
> 24 hourA lot more bang for your buck
-
Ksl
> 24 hourGood adhesion. Crisp detail. Careful it is hard to separate the supports. Cut myself. Very strong
-
ME Merit
> 24 hourI purchased this resin because I liked the clear materials. I printed a handful of items so far and these materials have worked out perfectly. Ive used 5s exposure for the main layers and havent had any issues connecting to the bed, layer to layer, and print removal. The odor isnt terrible and I find it more bearable than the anycubic eco resin and the basic resin that I have. I will definitely buy again but will likely try an opaque material instead of the translucent.
-
Tony Dixon
> 24 hourMy go to resin for transparent blue although this last bottle seems a little lighter than the last few
-
SierraTech
> 24 hourI purchase 5 different 1000g bottles of this resin, ALL 5 failed to print the bottom layers correctly. I tried the settings on the bottles and on Sunlus website, and all kinds of settings in between. I even contacted Sunlu and sent them screenshots of my settings and they came back with You can try setting the exposure time to 3s which is one of the settings I tried and sent them a screenshot of! SO I wrote back pointing out that I tried that, and it was in one of the photos I sent them and they wrote back The main reason may be caused by exposure time. If you need a refund, you can contact the store.! (Terrible support experience). I really wanted this resin to work, the price was right and the colors are perfect for what I wanted to use them for. I am using a Elegoo Mars 2 which I have had no problems with ever, with any resins Ive ever ordered. It looks to me like excess resin is curing beyond the models edges, I even reduced the bottom exposure times below their suggested minimum of 20 down to 10 seconds with a normal exposure down to 2s and still got the hole at the bottom of the model filled in with lumps of cured resin. UPDATE: I dont think there is anything wrong with this resin. After talking with Elegoo they explained ALL transparent resins will have anomalies like extra exposed resin beyond the boarders in Cavities, especially on the bottom layers because the light bleeds through the transparency of the resin. I tried another brand and had similar problems. However, you would think that Sunlu, being a printer and resin manufacturer would know this and explain it to me rather than throw silly suggestions out there of common things I already tried just to get rid of me. Im adding a couple more stars for the resin as it produces beautiful results as long as the bottom doesnt have cavities or you require critical specs on something like parts that require precise measurements. As far as their Tech support, dont count on it.
-
Michael C
> 24 hourI am new to 3-D printing and using resin. I’ve been working with him my any cubic and I use this resin with that, and it turned out to be a very good deal the arm the images turned out beautiful. It was easy to use and understand and care for them. Can’t the images look just like the way they were supposed to buy the color or the clearness I’m being new to this crafter we are printing. I am still learning a lot, but I would definitely definitely buy this product again because it was easy for me to use and gave me great product.
-
ben zion chen
> 24 hourGOOD
