TCP Global Air Rust Proofing and Undercoating Gun with Gauge & Suction Feed Cup, 2 Wands - 22 Long Flexible Extension Wand with Multi-Directional Nozzle - Spray Truck Bed Liner, Rubberized Undercoat

Dont waste your money. Cup is thin and nipples to lock the cup breakoff easy. Total junk. Had more fluid film leak then applied to tundra frame

i received this sprayer and it did not have the canister. i was NOT expecting one to come with it. The product picture clearly states that the canister does not come with it. The problem comes when i called this company and wanted to order a canister separately. the person who answered their phone said they did not carry a canister that fits this. i have to go to a local body shop in the area and they did not know if their canister would fit, but luckily their canister fit. my complaint is they should at least sell this with a canister ONLY or tell us where we can buy a canister that would fit.

air gauge has wrong threads tomatch sprayer

Easy to use, does the job, inexpensive, but not expected to last a long time.

First the cup does not have a positive lock, you can twist to tighten and it will just pop past tight and fall off. The trigger is cheap plastic and bends when attempting to spray, often popping off the boss necessary to actuate the trigger plunger. I bought this to spray Fluid Film and wanted the wands to spray the cavities. But when the wands are attached, it cannot spray the product, it only works with the spry tip, not either of the wands. Lastly, it comes with a regulator, which would be nice, but it seems to only work from 80 psi and above, try to drop below 80 psi and it goes right to zero.

Junk

Worked very well for undercoating my truck with fluid film. I feel it was fairly priced.

Had to add clamp to hold the hose on to the sprayer, but no big deal, as it would come off if you don’t put clamp on it ( small one)outside of that good value for the money

The whole reason why I bought it was to spray cavity wax and fluid film with the extension hose. The sprayer nozzle and hose doesn’t really work at all. I heater up the fluid film to a hot thin liquid and the hose wouldn’t really emit it at any pressure. Basically a waster of money for my purpose. It did spray without the hose pretty well if that’s all you might need it for.

had to then down to spray por 15 paint.