TCP Global Air Rust Proofing and Undercoating Gun with Gauge & Suction Feed Cup, 2 Wands - 22 Long Flexible Extension Wand with Multi-Directional Nozzle - Spray Truck Bed Liner, Rubberized Undercoat

Worked great for spraying fluid film.

The trigger is not well built. If side loaded it simply doesn’t work. Get lanolin on your hands (you will) and it gets harder to pull just right. It will get the job done but it shouldn’t be that much of a nuisance. Also the extension plastic tubing falls off the brass threaded insert. Not at all durable. Maybe fixable with a small hose clamp.

Made chea

I used it to rustproof the frame rails of my SUV. It performed well. The clear hose tends to come off the barb fitting. I used a small clamp to hold it on.

had to repair hose after first use but still good deal

Gun itself works OK but the wands do not. Tried to heat up the wands but that did not work either. The trigger is funky. I used some JB weld to fill in the open spaces on the trigger and that worked.

ITEM SHOULD HAVE A BOTTLE WITH IT, HAVENT FOUND A BOTTLE TO FIT ANYWHERE

If the bottom cans screwed on instead of, just turning it a little bit to get it to hold would be great because sometimes it wants to fall off other than that. It’s a very nice gun.

Again as others have commented, its a cheap set up but with a few modifications it did an excellent job. Removed snap ring on trigger, installed a washer, works perfectly. And as others, used small hose clamp on barb fitting. Did complete truck in two hours and no mess. Used old motor oil and Vaseline, heated and thinned odor free mineral spirits.

Great value