TRUE COMPOSITES Carbon Fiber Sheet & Epoxy Resin Kit (36 x 6 + 8oz of Epoxy) 2x2 Twill, 3K, 5.7 oz. - Carbon Fiber Fabric, Carbon Fiber Repair Kit, Kit de Lámina de Fibra de Carbono y Resina Epoxi

Another victim of the epoxy not setting up and hardening after seven days. I followed their mixing instructions exactly. I’ve been mixing up epoxy for various projects for many years and have never had a problem like this. Ruined my project and left me with a huge, sticky mess. Carbon fabric seemed fine but I’ll never truly know. If you must try this product despite many of us have this same experience, please test it first on something that will be discarded anyway.

the fiber came badly cut and the two chemicals do not dry and harden the fiber. very poor and low quality. Also when I received the package everything was spilled and the vendor was not responsible for the return and payment of the shipment

I used this product to repair a cracked top tube on my carbon fiber bike. I found, and followed, some videos I found on YouTube on repairing a bike using carbon fiber. I would highly recommend buying some heat shrink wrap to use on the carbon mesh after youve applied it. If youve worked with fiberglass before youll find that carbon fiber is nearly identical. I used small pieces and took my time in placement of them. I didnt wear gloves and didnt get any of the resin on my fingers. If you let the resin get sticky before you attempt to lay the fiber weave youll find that it sticks quite well and stays where you put it (I laid down 3 pieces). After the carbon was laid in place and resin applied, I wrapped the area with plastic, then with duct tape, and, finally, heat shrink wrap. After heat shrinking with a heat gun, I let the material dry for around 30 hours. It set up perfectly and required minimal sanding. I was very pleased with the outcome!

This product cures well and gives a high gloss finish. Like any carbon fiber it is delicate or susceptible to over manipulation. Therefore for best results lay down the a large section and cut to size while in the mold.

I used this product parts 50/50 and its still not hard just like a sticky mess. I putting this on a carbon hood and I think it just ruined the thing. I was fixing a small crack now its done for. Dont buy this product. Not even labeled.

This worked great. I fixed my bike easily

The carbon seat stay in my Rocky Mountain Element frame had flex on it. It was only a matter of time before it cracked, a potential disaster waiting to happen. The dreadful situation was averted with this kit. I got online help at YouTube, to help mend the compromised seat stay. So far a few rides in, and it works great.

Easy to use. We watched utube