TRUE COMPOSITES Carbon Fiber Sheet & Epoxy Resin Kit (36 x 6 + 8oz of Epoxy) 2x2 Twill, 3K, 5.7 oz. - Carbon Fiber Fabric, Carbon Fiber Repair Kit, Kit de Lámina de Fibra de Carbono y Resina Epoxi
-
Victor Sanchez
> 3 dayGood product i just wished it came in bigger quantity.
-
Joshua Parisian III
> 3 dayEpoxy never set, even when used according to the directions.
-
morgie
> 3 dayI have ordered this twice. Sent the first one back because of no cloth. Waited for several days to get the replacement, and still no fabric.
-
snype
> 3 dayRepaired my CF Front lip. In humid ass Florida though 48 hours cure time min.
-
Alaska
> 3 dayNo vapor. Great to work with.
-
Miss Birdie Daniel
> 3 dayI had a cracked seat stay on my carbon fiber bike frame. I have years of experience using fiberglass cloth and epoxy to build boats and water skis. Working with carbon fiber on a bicycle frame is no different. I wouldnt use a produce like this to attempt a front fork repair, but failure of a seat stay would not cause bad crash. It makes sense (at least to me) to repair it. Ive ridden the repaired frame for over a hundred miles now and am quite confident that it is safe for the future. . . . Not pretty, but safe!
-
Jozef
19-11-2024I didn’t receive the carbon fiber fabric, just the epoxy.
-
Joan G. Reed
Greater than one weekIve repaired three cracked bike frames with one kit over the last year. Really great product. For those finding it tough to manage fraying when cutting the fabric: 1) Tape off the shape you need on the fabric with narrow making tape. 2) Cut out the rough piece by splitting the tape, saving more fabric for the next repair, and making it easier to handle the working piece. 3) Apply epoxy inside the taped area 4) Cut right along the edge of the tape for final shape. It will not fray, and if you handle carefully, will hold shape as you apply. Id recommend practicing with a small sample.
-
ERW
> 3 dayIt was delivered on time and what I received as was indicated. The product is weak, carbon fiber is low grade and the resin-hardener. Carbon is very airy, the epoxy at 2 to 1 mix did not form at 70 control degrees for 48 hrs, leaving the project a flimsy useless.
-
a r baca
> 3 daydecent kit for small to medium carbon fiber repairs. instructions provide enough detail to use. will be used on CF racing fuel tank, seems like will work just fine.