Ultrasonic Cleaner Solution for Carburetors and Engine Parts, Ultrasonic Cleaning Solution and Washing Compound for Ultrasonic and Immersion Washers - Concentrated (32 Ounces)
-
james m.
Greater than one weekGood
-
Joe
> 3 dayProduct does a great job of cleaning small engine carbs and parts for me. Used in Ultrasonic cleaner mixed at 5 to 1 ratio and using heat mode cleaned dried fuel and stains from carbs quickly. Will probably ordering more as I get busier in the summer. Thank You!
-
Frank Robinson
> 3 dayMixed up a batch in my ultrasonic cleaner and has gone through 5 cycles of cleaning parts. Been doing a great job and seems clean enough to go a few more rounds before I have to dump and start another batch of solution. 4 to 1 parts water to cleaner is how I mixed it.
-
Woodrow Gray
Greater than one weekI just got this and have just started to use it. But it should definitely clean my small carburetors. Thanks for having this available.
-
Ali javed
> 3 dayGreat
-
Kelleys C.
Greater than one weekIt works good, just like the gallon of Simple green I bought, there is no difference! Save yourself a ton of money and buy the Simple green!
-
Cuda Gary
Greater than one weekThis appears to be nothing more than simple green in yellow. They smell identical, work exactly alike. Ive tried this, simple green, and purple power with similar results. Flaky residues, aluminum parts are dark grey after cleaning. Too bad the old Mechanics brand carb cleaner got pushed out.
-
Bituman Jones
> 3 dayI needed to clean several small engine carburators (honda, briggs, tecumseh). I was going to change them out with some cheap carburators off amazon, but decided to buy this cleaner to use with my ultrasonic cleaner. I found a mason jar that the carbs would fit inside, I then mixed sufficient cleaner (at a 5 to 1 dilution) to cover the carb within the mason jar. I filled my ultrasonic cleaner with water then put the jar containing the carburator into the mixture. I let it soak for a few minutes then I turned on the ultrasonic cleaner. 30 minutes later I had a carburator that looked brand new. This solution works, and if you employ the mason jar method, it will last a long time.
-
mike
> 3 dayWorks well kinda expensive seems to last awhile
-
Truc n.
> 3 daydoes not work, basically its soapwater and bleach