Uniden BC-UTGC GPS USB Cable for use with BCD325P2 Handheld TrunkTracker V Scanner, SDS100 True I/Q Digital Handheld Scanner and BC-GPSK Serial GPS Receiver

Not sure why this was needed. A USB cable is just as well to use. Vendor was great, delivery and return. Just don’t get the purpose of this product unless you need the round connector.

Only way I could get the correct connector on the scanner end. Cut the USB end off to make a custom cable.

Did not effect battery life I had it powered up

Plug and play set the baud rate to 4800 and let the GPS communicate with the scanner. Works seamlessly.

Worked for about a month, then started failing and may have caused the control board in my radio to fail. Maybe just a bad unit, but cant recommend at this point. Problem started with low serial bus voltage message while in use. Disconnected GPS puck and message still there. Figured it out too late to save the $800 (after upgrades) radio.

Works excellent!

Works fine.

No muss, no fuss. Plug and play. Works as expected.

Worked great for 2 weeks, now it constsntly says low usb bus voltage every minute or two....

Used it on a trip. Repeatedly received a USB low voltage error message. I had to wiggle the plug that goes into the scanner for it to come back on. I checked it with another plug and work with no issues.