Uniden BC-UTGC GPS USB Cable for use with BCD325P2 Handheld TrunkTracker V Scanner, SDS100 True I/Q Digital Handheld Scanner and BC-GPSK Serial GPS Receiver

Used it on a trip. Repeatedly received a USB low voltage error message. I had to wiggle the plug that goes into the scanner for it to come back on. I checked it with another plug and work with no issues.

No muss, no fuss. Plug and play. Works as expected.

Works fine.

Worked for about a month, then started failing and may have caused the control board in my radio to fail. Maybe just a bad unit, but cant recommend at this point. Problem started with low serial bus voltage message while in use. Disconnected GPS puck and message still there. Figured it out too late to save the $800 (after upgrades) radio.

Works great with my SDS100. Just plug and play and youre off and running with location-based scanning. I took a trip from Phoenix to Colorado Springs and never had to touch the scanner.

Perfect for use with the SDS100 as supplied. Wish the scanner cable was about 1 or even 2 feet longer though. Adding an extension causes occasional low buss voltage errors. Best no

Worked perfect for hooking up a gps puck to my sds100 scanner.

Fit Uniden SDS100 scanner with BR-355S4 GPS. Makes it really nice traveling with scanner.

Plug and play set the baud rate to 4800 and let the GPS communicate with the scanner. Works seamlessly.

Did not effect battery life I had it powered up