Welacer DTF Ink Premium 6x100ml Heat Transfer Ink Conversion Kit Refill for Epson L1800, R2400, L800, 1430, P400,P800,R2000,XP-15000 All DTF Printers,for DTF Film(White Cyan Magenta Yellow Black)

Works as expected

I bought the Welacer brand powder and DTF film to try with sublimation ink. I watched a multitude of videos and started testing. Most importantly, you can not follow the powder or film instructions. The preparation part of instructions don’t match up and they don’t work. The instructions say to melt the powder around 270-305 degrees. This did absolutely nothing. I moved on to testing what temperature works. To melt the powder on the film, I found the best end product results were achieved as follows: my printer was set for plain white paper, standard quality and I did end up using bi-directional printing, which adds more ink. You must practice with your printer. I was able to melt the powder evenly at an average of 350 degrees, but it took 5-6 minutes. I applied the transfer to fabric at 320 degrees and 15 seconds. I did a Luke warm peel. So, with that being said. You must plan on using up some film and powder to make it work for you. I found higher melt temperatures even at shorter times ended up with blotchy rubbery results. 1st photo is best results. It feels fantastic on the fabric. The second photo showed one of the better fails. Some of the fails were terribly blotchy.

I used this in a Sawgrass SG500. The product itself is really good. However, this product did not come in the packaging that is shown. Also, I have noticed that many of the sheets are different sizes. I have had to trim a few pieces because the sizing is off. It is a great price for the quality and quantity that you get.

I wanted to try this product to be able to sublimate on to cotton material. So far all images I print the printer roller runs through the ink and makes lines through the image. You also need to get DTF powder to use this paper. It is hard to tell what side is the side you print on, would be nice if it was clearly marked.

Paper is good quality but printer(Epson ET-8550)paper sensor does not recognize paper as it is too translucent. Missed return deadline but grabbed another manufacturers product and no longer have to deal with taping a piece of paper behind the sheet for the printer to recognize it

Its so hard to tell which side is the right side and it is easy to waste materials by printing on the wrong side.

This product works, but I have to apply it as soon as it prints because once the ink dries to a certain point this no longer sticks well. It could be a combination of the sublimation paper and ink that I use as well as this product. It works perfectly as long as I apply it right away. I would buy again

It has bright vibrant colors and a nice soft feel on the shirt

The ink itself is great. But they come in small bottles it’s not enough for the price that we are paying. It only comes in 100ml. They don’t have an option for a larger amount. Just go with other inks that offer more options. Overall like I said good ink not worth the price.

Worked really well . I will order again