

















White Original Touch Screen Digitizer for Samsung Galaxy Tab A 10.1 - Glass Replacement Parts for T580 T585 SM-T580 SM-T585 2016 (Not Include LCD) with Tools Kit + Pre-Installed Adhesive
-
James Uldrich
> 24 hourThe sensitivity of this digitizer is worthless. Extra pressure is needed to get it to work, if it works at all, at times even pushing hard makes no difference. I have replaced many digitizers, this is easily the worst one that I have had to deal with.
-
Jacey Blick
> 24 hourTook me about 15 minutes to replace. Tools worked great, and the screen is super good quality. Touchscreen works without any issues, and the adhesive tape holds it on good. Very happy with the purchase and would definitely buy again.
-
ismael negron
> 24 hourVery impressed by this 3rd party product same quality as the original and even looks way better.
-
Milton Lynch
> 24 hourbest packing and easy install
-
Hubba Bubba
> 24 hourMy wifes Galaxy was in a soft case that fell off her nightstand, hit a corner & broke the glass. I have replaced a few screen on phones and an earlier version of this tables, so this is not totally foreign to me. This kit comes with lots of tools, the Digitizer screen and 0 included instructions other then to search YouTube for a video on how to do it. I did end using a box cutter to start the separation of the plastic case from the frame as I could not get it to release with the include guitar pick or other included tools. Once I finally got it started I was able to run the rest of the way around with the pick & metal tool to get the case off. Due to the falling & breaking, the screen was easy to release from the adhesive. I did disconnect the battery cable on the backside before I released the screen cable for safety of the device. After removing the screen & then feeding the new cable through the frame & connecting it back, I made sure there was no dust on the actual screen surface. Getting the protective film off was a little difficult to start but easy to remove once I got it going. CAREFULLY aligning the Digitizer screen and laying it down in place, you press around the edges to make sure it adheres. I then reconnected the battery cable, snapped on the back cover, really cleaned the new screen well & applied a new screen protector & better case! I think the only tool I used was the tweezers to help thread the cable through the hole in the case. (did use the thinner guitar pick & metal pry tool a little) I am glad to get all of the tiny screwdrivers as I can use them sometime when working on other electronics.
-
J. R. Becwar
> 24 hourFirst time replacing the glass on a tablet/phone. Took me an hour. Used the heated bed on my 3d printer to soften the adhesive after removing the battery. Glass looks exactly like the factory glass and finger tracking is working great.
-
MarcAnt
> 24 hourI have bought many of these digitizer replacements for quite a while now and i have to say these have never let me down. Excellent replacement.
-
Mrs. Adkins
> 24 hourPERFECT FIT & all needed tools included. WORKS!
-
Joel
> 24 hourMy package came and it was broken
-
D. M. C.
> 24 hourThis isnt glass. Severally disappointing. Will return because it is no where near comprable to the current screen.