WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
MARY
> 24 hourIm very impressed with how easy it was to set this up. It automatically recognized everything (2.5 and 5 GHz) and I had it up and running in under 5 minutes.
-
Menaka Mahalingam
> 24 hourEasy to set up. Works perfectly for a month now with no issue
-
CHRISTINE
> 24 hourWorks like a charm. And like that is has an ethernet port on the bottom. Was great to extend our signal to a remote office and be able to use our Voip Phone.
-
ALBERT
> 24 hourThis is possible with the device, but I had to go to the manufacturers website and download the special instructions for changing settings. it is working now but I wish that this had been easier to set up.An added bonus for this device i didnt know about before buying is the ability to program the status LED to turn off at night.
-
JOYCE
> 24 hourVery easy to set up and extended my wifi range as expected. It is small and compact, making it unobtrusive where ever it is placed.
-
JEREMY
> 24 hourWorks like a charm. Easy to setup and didnt even need to read the instructions. Plugged it in, found my Wifi and 3 minutes later I was connected. Will buy another one if I need it without hesitation. :)
-
tyskalio
> 24 hourUnschlagbares Preis-Leistungsverhältnis.
-
egon 3777
> 24 hourhabe zwar fast alles auf w-lan aber die Kinder brachten eins und es ist sehr dünn und es lässt sich gut verschwinden
-
JOYCE
> 24 hourYou cannot go wrong with this. You can spend more on another repeater, but not get as much value! Easy set-up. Rarely does it lose signal, but with light changing color it is easy to see. I get full bars - I doubt it would ever get that fast. Still , until technology improves, this is the one to buy!
-
JEREMY
> 24 hourExcellent basic router extender. Works great at my parents home who have a D-Link DIR-615. In combination with both, excellent coverage throughout the house.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
