WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
MARGARET
10-06-2025for some reason if I had even a regular plug in the outlet, the extender couldnt get a good signal from the router. I figured out the best location and then moved the other cords to different outlets.Everything seems good to go now.
-
MARGARET
> 3 dayIt does what it says it does, my signal has boosted by 75% since I got this. I would re-buyThis WiFi extender is very easy to setup and works great. I recommend it.
-
KEITH
> 3 dayworks like a dream!! my kids were forever complaining about the Wi-Fi in their rooms. figured id give this a try. what a difference this little guy made! 4 bars in their rooms, and no more complaints!! Highly recommended!
-
shelly389
> 3 dayFür den Preis ein empfehlenswertes Produkt, welches seinen Zweck voll erfüllt. Bei der Länge von 10 Metern ist es flexibel einsetzbar.
-
KEITH
Greater than one weekgave my wife on the other side of the house much stronger signal. easier connection to wi fidoes what it is supposed to and super easy setup took less than 5 minutes
-
Gary Bentley
> 3 daythe product have easy set up and easy to link to your main router, since i use the extended wifi now i can get the signal in my bedroom and living room with a great signal
-
Musa
Greater than one weekBrauchte ein langes LAN Patchkabel um meinen PC mit dem Router zu verbinden. BIGtec 10m CAT.5e Ethernet LAN Patchkabel Gigabit Netzwerkkabel Patch Kabel... bei Amozon gesucht und gefunden! Kann ich nur empfehlen, klappt aufanhieb ;-)
-
Max
Greater than one weekIch war anfangs etwas skeptisch, ob man bei dem sehr günstigen Preis überhaupt was erwarten kann. Da die Bewertungen aber so positiv aufielen, habe ich mir direkt 5 Stk. dieser Kabel bestellt.
-
KIMBERLY
> 3 dayWork better than expected. Range is good. My house is now well cover with this extender. Easy to set up.Easy too configure. I love the lighted center so you can tell when the signal drops.
-
JEREMY
> 3 dayhave a large home and router and modem in one end. before the range extender could only get occasional internet in other areas of home. now have good reception in all rooms. love it
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
