WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
JERRY
> 3 dayDid a wonderful job of extending my home Wi-Fi coverage! Setup was a breeze; did not require cables or the packaged CD software.
-
MARY
> 3 dayIm very impressed with how easy it was to set this up. It automatically recognized everything (2.5 and 5 GHz) and I had it up and running in under 5 minutes.
-
SANDRA
> 3 daySo far so good. Back to full signal in farthest room.Instructions are so bad they arent worth paper theyre printed on. Its almost as if they are a joke. Follow the users review about bad instructions and after a half hour of walking around your house trying to read instructions again and again with nothing happening. Open that review and use your wireless device not desktop and follow the steps. Was up in 5 minutes after reading it!
-
Jannis Schwarz
> 3 dayDas Kabel macht keine Probleme und 10 Meter sind in den allermeisten Fällen ausreichend, ist auch recht dick und damit robust.
-
sLeuCK
Greater than one weekJa das Teil funktioniert wirklich wie es beschrieben ist, ohne Aussetzer oder anderen Negativitäten.
-
CHRISTINE
> 3 dayWork well and simple to set up. It took me less than five minutes to open the box, read the quick set up guide and have it running.
-
PATRICIA
> 3 dayVery good product.. working without any distributionHave it for over a month no problems... Definitely canrecommend to anybody...
-
Kladi
> 3 dayAlles in Ordnung mit dem Kabel schnell verbaubar und und und - Alles OK. . . . . . . . .
-
Marvin L.
> 3 dayDa ich zu Hause einen 100.000 -er Internetanschluss habe und über Wlan doch recht weit von der versprochenen Leistung fern blieb hatte ich mich dazu entschlossen Kabel zu legen.
-
PATRICIA
> 3 dayWell, read all the reviews and decided to buy this.... I am very happy. I follow the setup directions by linking to their website. Everything happened and worked as described with no problems getting this going. I now have coverage in the entire house. Great product for a little price.PS: some reviews were correct, when you power this up, it does take a few minutes for the power light to go blue, so be patient.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
