WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
ALBERT
> 24 hourVery happy with the extender ,it was simple to set up and put into service ,would really really recommend to other to purchase.
-
Ekim
> 24 hourArtikel wie beschrieben: Schönes Design und 10 Meter langer Kabel. Funktioniert. Was soll man hier überhaupt falsch machen können? :D
-
littrrs
> 24 hourWorks great once you have it set up. Set up was a little rough. Some of the sites that took you too did not load and took alot of time to work threw. Once it was set up though it has worked great.
-
Max H.
> 24 hourunschlagbarer Preis , bin sehr zufrieden
-
JOYCE
> 24 hourIt works great we have family that live in front of where we live, and we use this to use their wifi, and get a pretty strong signal
-
Marion Schacht
> 24 hourSo wie bestellt auch schnell geliefert.
-
JEREMY
> 24 hourunit was super easy to setup and works great. Range is very good and has very good passthru.excellent product easy to use if you also have the TP-Link wireless router
-
KEITH
> 24 hourI finally got fed up with not having wifi coverage in one of our bathrooms (First World Problems!) so I picked this little guy up. It goes though 4 walls (2 of them tiled shower walls) over about 40 feet just fine. Im really impressed.
-
MARY
> 24 hourIt did take me awhile to figure out how to use it. It must be configured with a smartphone and not the computer and it needs a MAC address of the device who will be accessing your network via the extender. Works great - great price. I use it for extended range with IP cams.
-
olga torres
> 24 hourYou cannot go wrong with this. You can spend more on another repeater, but not get as much value! Easy set-up. Rarely does it lose signal, but with light changing color it is easy to see. I get full bars - I doubt it would ever get that fast. Still , until technology improves, this is the one to buy!
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
