WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
JOYCE
> 3 dayWe just moved into a large 3800 sq. ft. home and I set up the wireless router in the middle of the house. My primary concern was the upper living room and deck and the extender covers those areas perfectly so there are no dead spots. For the money its worth the investment if youre not getting full wifi bars on your devices.
-
Constantin
> 3 dayDer cable sind sehr gut
-
JERRY
> 3 dayI was looking for something quick and easy to boost my wifi because my bedroom was a dead zone. This was cheap but it works great.
-
Malchen
Greater than one weekDas BiGtec 10 m Kabel CAT 5e macht einen sehr stabilen eindruck ,und lässt sich leicht vom Router und in meinem fall mit dem Tv Gerät verbinden.Es funktioniert einwandfrei zu einem sehr guten Preis.
-
MARGARET
> 3 dayThis wifi extender does the job! I was hoping for a little more distance and ability to turn corners and go through walls, but its 90% what I was hoping. Has already paid for itself by reducing my data usage!
-
tyskalio
> 3 dayUnschlagbares Preis-Leistungsverhältnis.
-
Alexander
09-06-2025Es ist ein stabiles Kabel das nicht leicht Knickt. Auch die Stecker machen einen soliden Eindruck.
-
BENJAMIN
> 3 dayQuick & easy setup with included instructions. It is working great & we no longer lose our wifi sigmal on the 3rd floor of our home.
-
DenHelm
> 3 dayIch habe dieses Patchkabel gekauft um es bevorzugt auf LANs zu benutzen. Und ich muss sagen mit 10 Metern kommt man meist recht weit. Optisch macht das Kabel etwas her, auch wenn das bei diesem Kabel eigentlich keine Rolle spielt ;).
-
Morteza Amiri
> 3 dayIch war auf der Suche nach einem Netzwerkkabel, welches nicht so teuer seien sollte, aber dennoch Qualitativ gut. So bin ich auf dieses Produkt fündig geworden. Die Qualität ist jetzt nicht so hochwertig, aber erfüllt seinen zweck. Was man aber bei so einem Günstigen Preis nicht erwarten kann.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
