WindyNation 4/0 Gauge AWG (6 Feet Black + 6 Feet Red) Power Inverter Battery Cable Wire Kit for DC to AC Inverters RV, Car, Solar, Marine, Off-Grid

Worked very well to relocate a winch control box under the hood. Wire is high quality and very flexible.

Great product

Used to wire for my Minn Kota 80 lb bow mount trolling motor and the kit worked perfect. Soldered all of the connections with a propane torch and sealed the connections. Recommended.

Wire, terminal rings, and heat shrink were all there and worked fine for my application.

Hasta el momento esta funcionando muy bien.Me hubiece gustado el manual fuese en espanol tambien y no tan pequeño,hay que utilizar una lupa para poder leerlo.

I connected directly from the battery to the circuit breaker and everything works.

Overall good deal. Not perfect but really good. The red wire was an inch longer than 10 foot. The black was an inch short. The outer insulation is rubbery and very flexable. Cable cut good with Harbor F cable cutter. Terminals are ok. I like tinned copper. Has more flare than the Trolley pure copper lugs in the welding section that are UL stamped. I get more cable inserted into the pure copper lug because of the shape. Hole size is the same, ( accurate for what it is.) Ground wire is labeled 10 AWG. Looks accurate. Terminals crimped on looks ok and pulls good. I would of liked unterminated so I could cut to length. Terminals might end up being small for my application. I did not measure length.

Used to run from my bow mount trolling motor to the batteries in the back of my 18 ft boat. Perfect amount of wire and I liked all the different sizes of battery connectors that came with it.

Thick gauge wire is required for use with batteries. This pack give a way to choose your cable length while having quality wire to battery connection. The quality is outstanding. You will need tools to crimp the ends.

Used this for a inverter charger I installed in a enclosed trailer worked great