YOTOO Hybrid Air Hose 1/2-Inch I.D. by 50-Feet Long 3/8 inch MNPT Solid Brass Fittings 300 PSI Heavy Duty, Lightweight, Kink Resistant with 3/8 and 1/4 Industrial Quick Coupler Connectors, Gray

There are those jobs where the long air hose is not needed. For me, that is putting air in tires, car or fat tire e-bike, along with the occasional connection to an airbrush. In those cases, this hose is more than adequate and could take the abuse for other more demanding jobs. I have no complaints having used this hose and just glad to have this on hand for my smaller jobs.

I decided to get these hybrid hoses for my home shop. While I still use 1/2 rubber hose for commercial jobs where they are subject to more abuse hybrid hoses are much lighter and smaller, more durable than polyurethane and more flexible than PVC which make them a great choice in my situation. These come with the large 3/8 industrial coupler and plug pre installed to take advantage of the larger hose size, I think they should have included high flow couplers rather than the 1/4 industrial couplers (or just left them out) , but it does include 2 3/8 to 1/4 reducers and a 1/4 M- style coupler and plug for those who need it and are not concerned about losing air flow. This is very flexible and coils up surprisingly small for a 1/2 hose.

Was looking to replace our existing air hose and found this one. Heavy duty enough and long enough for our purposes. Not sure if it will hold up long term with frequent use, but certainly is sufficient for our purposes.

Durable air hose and it came with different size fittings which was very helpful since I changed mine out. Also came with a roll of Teflon tape

Well made lead line to go from the compressor to the wall lines. Note, this is the large fitting line! Will not fit your regular standard fittings. This line is meant to carry more flow to the hard lines throughout your garage. Be prepared to to have matching fittings on the compressor and the hard lines. I took a picture of the regular fitting next to this one, I hope it helps.

This is not your typical home-shop lead-in hose. Using 3/8” couplers, it won’t mate to your consumer grade 1/4 air couplers. No, this is meant for a high-volume large reservoir compressor to reduce transfer losses from the tank to the hose reel, for instance. It is perfect as a whip hose for a 1” air gun or as the supply line to a tire changer to facilitate fast fill up for the bead seater. This assumes, of course, that the rest of the air plumbing in the shop can keep up. The hose claims to be “hybrid” composition of rubber and PVC, and this makes it more flexible than I expected for such a beefy air hose. The end couplers look to be of excellent quality and are steel instead of brass to add durability. A strain relief at each end prevents kinking and should also prolong the life of the hose. I have another Yotoo brand 3/8” hose that gets dragged across the shop floor, run over, and pulled from across the shop and shows excellent abrasion resistance and durability. I fully expect this one to do just as well. This is an excellent brand.

I like this hose. Although the material seems durable I think it’s more suited to home or in-shop use. I don’t think it would hold up to outside, commercial duty, like a roofing crew. I could be wrong. Time will tell. Stretched out it doesn’t kink. The manufacturer supplied fittings for both one quarter and three eights. Teflon tape is included. It’s a nice hose.

Have not used it. Enables me to discard old hose which leaked at fitting .

Quality is generally lacking in air hoses however the manufacturer has gone all out on this hose extension with high quality connectors, solid clamping to the hose and a somewhat flexible plastic sheath covering about 2 of hose and 2 with the crimp to the hose. It is very different from an inexpensive hose and I would think that in a garage setting with heavy use this would way out last a plain hose with connectors on it. The covering of the end of the hose and the crimp looks as if it would survive being run over or other mishaps that occur in shops frequently and so a user should expect a fairly long life from it

The YOTOO Hybrid Lead-in Air Hose 1/2-Inch by 6-Feet is the perfect length to connect the air compressor to the filter. The 1/2 inch size can move a lot of air. The 6 foot length allows me to move the compressor a little and it avoids a lot of extra hose. This hose is perfect for the situation I ordered it for.