Zalman I3 NEO Black Edition Airflow ATX Computer Case with Mesh Front Panel, Magnetic Swing-Open Tempered Glass Side Panel, 4X RGB 120mm Fans Pre-Installed, Mid Tower for Gaming or Office Work

I think its worked pretty well, my only problem is that the RBG fans always blink on and off with the color, and I dont know how to fix it

Big case for low price

In 25 yrs I built over 400 units, I have completed a computer in 30 minutes and other times 1 hour. This case is CASE FROM HELL!!!! After doing all my connections, unable to mount in case. Standoffs DEFECTIVE!!, SCREWS WOULDNT FIT, OR GO IN AT AN ANGLE AND WOULDNT COME OUT. HAD TO UNWIRE BOARD take out, replace all standoffs, and new screws. Waste of over 4 hours wiring and un wiring , and still hard time to install, Im GREAT at what I do. This case made me look like a 1st NOVICE TOOK AND THREW OUT THE WINDOW WHILE FOING 80MPH, JUST PUNISHMENT FOR THIS CASE!!!!! Thank God Amazon REFUNDED MY MONEY, and was able to get new case, and 30 minutes later computer was done. John F from New York

The first time I popped the front screen off as per the diagram in the manual, one of the plastic tabs broke off. Other than that, the metal is sturdy, theres plenty of room for a CPU cooler and a large Graphics card. Pretty good amount of space for cable management, The fans are quiet, although the LEDs arent addressable. Pretty decent as long as you can tolerate the rainbow aesthetic. Customer service is fantastic. They helped resolve the issue quickly..

This case is super nice and easy to work in when building with lots of room for cable management and it included everything I needed to complete the build I am amazed at how awesome it looks.

Let me start off with the packaging, this case came in a normal PC case box but what threw me off was that it came with this squishy foam-like material which in my experience was great. Unlike most cases that come in squeaky foam, this one does not break off easily and protects the case very well. Let me start off with the things I like most about this case. 1) The glass is on hinges which is very nice for convenience when switching out parts or even adding a little figure inside the PC. 2) The case comes with four RGB fans that are included so you dont have to buy fans would work perfectly fine with putting one of the front fans on top. 3) This case has a very nice hard drive and SSD tray that you can pull out without having to use any screwdrivers. 4) On the back where it comes with screws, it includes a glass cleaner wipe, USB plugs so dust doesnt accumulate, and extra GPU brackets so if you decide you want to switch out your motherboard it wont have a hole on the back. 5) This case also has a big spot on the top so you can mount bigger or smaller fans. 6) It also has very good airflow because of the mesh front. 7) Has enough space in the front of the PSU and the glass to put a sensor panel if you wanted to add one because I personally have not seen this on another product. The market doesnt have this design leading people to put the sensor panel on top of the PSU shroud or on the back exhaust fan spot. Now for the things I wish this case has. 1) A bigger space to put more hard drives or SSD because even though the spot for the hard drive, there is only one so the max amount of hhd and SSD you could fit is three. One on the back of the motherboard, two on the hard drive case near the PSU, and two in the front but for the ones in the front, those are a bit harder for the cables to reach and the cable management for the cables wouldnt be as pleasant to see. 2) The other thing is that when routing the cables in the back, it was a little difficult because the cutouts are very close to each other so this leave holes and if you have some cables that are not long enough, then youd have to run it up against the holes. Overall, other than these two things that I have listed above, this case is amazing to build and look at and doesnt feel cheap. If you are buying a case/ or looking for a case for your next build consider this one to be one of your top PC cases.

I bought this as it has a superior capacity to take one of the latest HUGE GPU cards. It looks good, well built, reasonably priced and had plenty of space to relocate the innards out of my old case and add the new GPU. Love the light show fans !

Hey guys, if youre looking for a budget pc case, this is a good quality budget one, this is the one. The fans at max rpm made no noise at all, the case maintains good air flow, the case has good quality parts and lots of space for water cooling cpu AND gpu, you can fit 3 ssds, 1hdd 3.5 and what is pretty vool it comes with a tiny speaker.

An amazing value for the asking price. I managed to cram a 360mm AIO cooler and an Nvidia RTX 3080ti in this case with a little room to spare. The stock fans arent addressable RGB, so I didnt use them. If youre used to more expensive cases, youll notice that the metal is on the thin side, but its not what I would call flimsy either. The only other knock on this case comes from it being described by Amazon as tool-less; only one drive bay is tool-less, and its in the mechanical hard drive cage. The rest of the ssd locations will require screws. It didnt really matter to me, but its worth mentioning. All of the negatives with this case are extremely minor or built in at this price point. The design of this case is actually impressive. You can fit a lot of hardware in this thing, and it looks pretty nice, too. If youre on a tight budget or you just want the best bang for your buck, this is an easy to recommend case.

Maybe I did something wrong but I wish the rear fans cord wasn’t in the way of the fan itself. Other than that perfect case.