Zcintert Reflective Safety Tape 2 Inch x 33 Feet, DOT-C2 Yellow Conspicuity Reflector Strip for Trailer Truck Vehicle

They do the job

Was a great price, and fast shipping. Applying to rear of golf cart for added stopping reflection. Will update as far as tackiness.

Burns out after a couple a month

These decals are great and did exactly what I needed - add high quality and effective reflectors to the back and sides of my trailer after a removal of the factory ones for paint refresh. So far theyre doing really well. Adhesion has been excellent. I actually had to remove one to repair a patch of surface rust I noticed after painting. It was a pain to get the reflector off! I had to scrape it with a putty knife and then hit it with a wire wheel. And thats in cold, high 20s to low 30s temps. I also really like how reflective these are. They definitely grab attention as they should. Having the roll is very handy as well. Just measure the length you want and cut to fit for your specific application. I certainly will be back for more once I run out of this roll.

See above.

I experienced two issues with the roll of reflective safety tape I received. The backing of the tape to expose the adhesive was very difficult remove. The film that covers the reflective surface (clear and red) separates as seen in the attached photo.

I put this outside on a heavy metal guard many months ago. Its gone through all kinds of weather: very hot, very cold, snow & rain. And its still in place and as bright as when new. Its doing just what I needed it to do.

This tape is junk. Just unrolling the tape to cut a section revealed several areas where the tape delaminated. What a waste.

This reflective striping is a good value for its price, is nice that you can cut it to size, and appears to hold up well to the elements, at least so far. Ill update my review should it not last.

I wanted something to mark the outboard fuel can carriers on my Jeep so that I and other people would stop walking into them at night while camped (they stick out slightly from the side of the Jeep and when you come around to the back of the Jeep they are painful to walk into. With this tape applied, they light up beautifully when one is wearing a headlamp. The other nice thing is that the tape is not overly ostentatious during daylight, so it more or less blends in with the white Jeep. One thing to note is that this tape has DOT-C2 printed on it every few inches. I just cut those pieces out for my purposes but for some people this might be a deal killer so be aware! I doubt this tape is actually DOT-C2 compliant (despite it being printed on the tape) because according to my reading, DOT-C2 tape is supposed to alternate between white and red color. So caveat emptor on that aspect of this tape. But for a prismatic tape that goes on easily, is easy to cut with a knife or scissors, doesnt have a gummy adhesive, and reflects light really well, I think its a good buy. JUST BE AWARE OF THE DOT-C2 printed on it!