















Zentop Touch Screen Digitizer for White iPad 7/8 2019 2020 7th/8th Generation 10.2 A2197 A2198 A2200 A2270 A2428 A2429 A2430 Front Glass Assembly Replacement with Toolkit (Without Home Button)
-
HT
> 3 dayThis touchscreen works good as the original did. It came with the tools shown in description. In my opinion if your not technically inclined I would recommend asking a friend that is to help you. I have done several IPhone screen replacements, however never done an IPad screen I took me a good 1 hour after I got the old touchscreen out to install the new one because I tested it several times b4 I glued it down. It is a great value for the money spent.
-
A. Benvenuto
> 3 dayThis is the second screen digitizer that I bought for my iPad. The first one Tphael or something like was a totally waste of money and time, broke when finished the installation while pressing the sides to make the adhesive tight and never worked properly even before removing the adhesive strips. This one so far it’s working for me still not the very best adhesive but at least hasn’t fall of yet. The best digitizer option replacement.
-
Kris Harris
> 3 dayUpdate... As I mentioned in my initial review the touch screen sensitivity is not as good as oem, but since my review the touch has completely disappeared. The tablet is no longer usable. I have reached out to the seller and not gotten a response. I would not buy from seller die to the lack of a response. This review could have been avoided if they had just responded to the issue. Easy to install. The touch sensitivity is not quite as good as the original, but the screen is crystal clear and was an easy install.
-
Sal
Greater than one weekNa
-
Meri
> 3 dayDon’t waste your money. It’s paper thin and the sides break ins second
-
Drod
> 3 dayHad to order a Home Button with the screen but it fit perfectly and my iPad is working and looking like new.
-
Biotech13
> 3 dayPerfect fit!
-
Full Throttle Repair LLC
Greater than one weekAs a description says, it was missing tools. Not a big deal as I do hundreds of these for customers and have pails of tools, literally. The glass is a little thinner than the original. The item arrived in a plastic bubble wrap mailer with little to no protection. I was actually quite surprised that the screen was not shattered upon delivery. When installing the screen, since it does not come with a home button, take your time and very carefully remove the original home button. If your home button is broke and you are not transferring it, and buy a home button off of Amazon, your touch ID will no longer work. The touch ID only works for the original home button that was included with your iPad. Also, the screen did not come with any adhesive. Not really a huge deal as I always used T 7000 adhesive and throw the strips in the trash.
-
dittodog
> 3 dayI have a couple dead zones now on my iPad. Mostly it is in the middle left area. There is also a somewhat noticeable space between new digitizer and the lcd screen that makes a slight tap noise. All in all, I am happy as the cost was low, DIY learning experience, and the iPad is functional enough, but not 100%.
-
supershopper
> 3 daythis is clear and responsive, as if i am not using anything at all. easy to install. works just like OEM products