10-Piece Hole Saw Kit for Wood | Durable Carbon Steel Power Drill Hole Cutter with High Precision Cutting Teeth – Woodworking HCS Hole Saw Kit for Wood, PVC, Plastic, Drywall

This is a pretty good set of hole saws. The price is right and the quality of the components are good.

Ive used two sizes so far and no complaints at all. For my occasional use, this was a great purchase.

Exactly as described.

Im confused on the negative comments. For the price, what do you want? Ive probably have two or three of these drill sets over the years. Why I keep losing them I have no idea, but this set is every bit as good or better. I had a lot of holes to cut and the first cut was as smooth as the last. As a suggestion, dont ever smoke them. Take your time cutting the holes, pulling out the blade and blowing out the sawdust a few times. Takes a few seconds more but a lot less wear and tear. I have no problem with the quality.

They provide a drill bit to help you line up. The drill bit works well in the larger mandrel, but does not fit the smaller one. The fastener sticks out too much and this causes the hole saw to skew as it sits on the mandrel <See the picture; note the small black bump on the left side above the threading>. Tightening the collar only helps a small bit. The skew is noticeable and causes oscillations while drilling. I emailed customer support about this, and they did not reply. I was going to bug them again but by then I had missed the return window. Buy your tools from someone else.

I was looking for a hole saw kit to install a new deadbolt onto an exterior door. The instructions for the deadbolt said I needed 2-1/8 and 1 holes so I looked for a kit that included both of those sizes. Surprisingly that was kind of difficult to find. I could easily find kits with 1 or the other size but this was the only kit I could find with both sizes I needed. So I give credit for including those sizes, which I imagine are standard for installing a deadbolt or door knob. My problem with this kits comes from the quality. The metal of each of the bits is extremely pitted and looks to be scratched up and used, but was not. Very poor quality control. Also the case they came in is very cheap and the plastic latch is extremely flimsy and will break off after opening and closing a few times. This is not a tool I will need often, potentially ever again, but I would likely look for a better quality kit if you are searching for hole saw bits.

Bought these since the set I had was missing a size or two. Used it to cut into some very dense plywood using my drill. It got hot enough to smoke so I had to stop and let it cool a few seconds and use a wire brush to remove the wood that got stuck on the teeth, but after a couple of bites it made it through each time. No warping or damage to teeth after drilling about a dozen holes. I also liked this one because it came with one drill bit for all the hole saws, unlike another set I returned where some of the hole saws only fit the larger drill bit which was too big for my 3/8 drill.

Dont count on this to cut a hole in a precise location, or to have the hole cleanly cut, as the drill bit doesnt necessarily center the round cutting blade - if you can get the round cutting blade to even seat upon that bit at all. The first hole blade I tried to use wouldnt seat because its cutout hole was off center. It is unusable. The second one I tried could be bolted on, but wouldnt turn evenly in the drill. Instead it wobbled back and forth even when it was properly tightened in a drill that could handle every other bit its ever taken. But that was sufficient for cutting the hole I needed at that moment. I dont know if any of the other hole bits will work for my purposes. This was certainly inexpensive - and if your expectations are low, it may work for you. Its definitely NOT High Precision (as advertised.) For a birdhouse hole, a bird probably wont care if its off-kilter. But if youre cutting a hole where it matters, you might want to spend a little more and go with something better.

I was needing to drill assorted size holes in 2 pvc piping. This set worked perfectly for that project.

Worth the money and easy to use.