100 Pack 608-2RS Skateboard Bearing, Rolling Bearings, 8x22x7mm 608rs Bearing

It’s 100 Skateboard Bearings COME ON! Buy them now!!!! Must clean first from factory residues and spray with a bearing solvent to get some actual use out of them.. I bought these to sell with my skate wheels and it worked! They can be skated! Risk It MANE!

Pros: * Theyre very cheap. * They seem to be reasonably well made. Cons: * There is a lot of drag in whatever they used to lubricate these. It doesnt feel like the drag is from the bearing itself so much as it feels like they used a very heavy grease to lubricate them. I would only use these for very low-speed applications with enough torque to overcome the drag.

Poor manufacturing & blunt tooling along with piss poor quality control have rendered these bearings useless. Machining of the metal races is so low along with bearing cages that are concentric means the bearings are worn out before you even use them. DO NOT BUY THIS JUNK

The quantity was great for the price.. lots of DY projects

Ive owned many bearings over the years, for many purposes. I didnt leave a review sooner ( I ordered these OVER TWO YEARS AGO) because I figured with the absolute abysmal quality, there was no way the listing/store was still even up. You know those things you order, but by the time you go to review the entire seller has disappeared, seemingly overnight? I expected that of these. Out of a set of twenty of them, I found eight which dont exhibit axial tilt while rotating, like the earths axis is tilted and wobbles. Their axial play is easily perceptible, their axial precision (angular wobble off axis) is ABYSMAL (Id say 2.5 degrees on average?) and they make SO. MUCH. NOISE. IF you need a billion bearings with absolutely no requirement for precision or reliability, buy twice as many of these bearings as you think youre going to need. If you need any manner of stability, quietness, precision, reliability, longevity, or any other positive attribute beyond nonzero weight and doesnt crush easily from the side Id suggest you look ANYWHERE else. Ive been angry every single time Ive had to try to find a usable one for a project, for literally two years. NOTE: Im not joking, I can print bearings which run more smoothly and silently than these, out of PLA, AND they track straighter. No, theyre not nearly as strong, and will crush readily, but these are worse for most of my applications than PLA printed bearings.

Yup, they are bearings. But would not give above a C rating for condition, even at this price. Packing was lacking. All just in a big bag. I found at least 3 different labels on the seals so thinking its a mixed batch of brands. Probably why some seem ok and some not so much. Also cleanliness control was lacking somewhere. as several of them have heavy grit all over. Normally would not care that much, but considering the seal is questionable on many of them as well, its likely the grit got into some. Wanted to use out of the bag, not have to clean and re-lube before use. One seal was missing a part altogether, and others have gap where you can see the bearing inside. Would have been just as well to get non-sealed bearings.

These bearings served my needs well. Highly recommend.

Muy mala calidad lo que se muestra en la foto no tiene nada que ver con el producto

Did not fit as expected, fits sloppily on the axle what about a half a millimeter of Clarence although this may have been partially my fault but

side seals are plastic and some are a bit deformed and interfere with the balls. About 1 every 15 or so are like this