2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
Christian
> 3 dayAllerdings fallen die Haltenasen recht schnell ab, benutze dieses Kabel teilw. auf Notebook wo das Kabel ständig raus und reingesteckt wird, dieses Kabel (bzw die Stecker) halten das auf Dauer nicht aus und dieses Einrasteplastik fällt nach 3-5 Monaten immer ab.
-
MARY
> 3 dayI have a network printer on a higher level then my router and the connection went from poor to excellent after placing the extender on the floor between the router and printer.
-
KIMBERLY
> 3 dayAfter carefully following the set up instructions this device worked great. It completely solved my poor reception problem and even increased the range to at least 125 feet outside of my house. This was a very cheap solution to my problem, I highly recommend this product.
-
klinhgf
> 3 dayWithout the range extender, Netflix on my bluray player would constantly re-buffer, my cell phone would struggle to load instagram and my MacBook connection wasnt the best.
-
CHRISTINE
> 3 dayWe would not be able to watch streaming movies on master bedroom smart TV without this very helpful Wi-Fi range booster. It works as advertised. It came on time and had idiot proof installation guide.
-
Bayan
> 3 dayhabs vor 5 Jahren gekauft, benutze es immer noch ohne kabelrisse oder fehlfunktionen
-
ALBERT
> 3 dayWanted to extend my wifi distance so I could stream TV in our camper. Before we could not. Now... no problem. Works really best and pretty easy to set up. we had a router downstairs and spotty reception upstairs (house has thick walls). This product was pretty easy to install and solved the problem perfectly.
-
Ullmann
> 3 daykabel funktioniert wie erwartet.
-
JERRY
> 3 dayIt comes at the indicated time (48 hours) works great. Very easy to install and use. It exceeded my expectations. fully recommended
-
yun jing
06-06-2025Got this product after returning a Belkin N600 dual band wifi extender from radio shack which was trash. Set up was pretty easy. No longer have any dead zones in my house. It works great. It took a little while to set up, but after I decoded the directions, I was able to get them set up easily. The work great!
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
