2023 New Upgrade WiFi Extender Booster Repeater, Up to 8000sq.ft and 45+ Devices, 2.4&5GHz Dual Band Wireless Internet Repeater and Signal Amplifier for Home & Outdoor, Supports Ethernet Port
-
JERRY
Greater than one weekIn my case, this extender has improved the strength of my WiFi and speed of devices.Outside of the hassle I had (again, maybe its just me) during setup, I recommend this product. I dont know how it works, but it really DOES work.
-
CHRISTINE
> 3 dayWorks perfectly and as promised! Installation was smooth and easy as well. The quick sync off the router did not work but the install through a laptop went through perfectly. My coverage blind spots are now completely resolved. Most important,the device has been powered up for several months now and hasnt once lost the router connection. Great buy!!
-
Amaryllis
Greater than one weekBIGtec 10m Gigabit Ethernet LAN Kabel Netzwerkkabel schwarz passt und ist so in Ordnung und!
-
Uwe Thamm
> 3 dayMit Vorsicht behandeln.
-
JERRY
> 3 dayWorked easy and good. Occasionally have to reset it but its a quick fix. And face it...NOTHING works perfectly. I recommend it.
-
KEITH
Greater than one weekBuyer beware!!I almost returned mine since was getting 1-2 bars on other side of the wall.It is not brick friendly, move closer to a window opening.Working wonderfully now.
-
ALBERT
> 3 dayExcellent basic router extender. Works great at my parents home who have a D-Link DIR-615. In combination with both, excellent coverage throughout the house.
-
PATRICIA
> 3 dayWorks exactly how it says it will. Ive already highly recommended it to friends. I bought this back in June because my PS4 cant connect to the wifi because my room is to far away from the router.
-
Kindle-Kunde
> 3 dayDas bestellte Kabel wurde schnell und perfekt geliefert; es gibt keine Abstriche zu benennen. Danke nochmals an den Verkäufer.Der Artikel war bei Amazon gut beschrieben. Mit diesem Netzwerkkabel wird eine Verbindung zwischen PC und TV hergestellt, um Daten zu übertragen.
-
PATRICIA
07-06-2025Needed better wifi in the back yard to control the spycam in a bird nesting box. This works perfectly with my TP-Link router, very happy with this purchase.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed. |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
