3D Printer Powder Painted PEI Flexi Steel Magnetic Build Plate 235 * 235mm for Creality Ender 3 S1 Pro,Ender 3,Ender 3 V2,Ender 3 V2 Neo, Ender 5,Ender 5 Pro

I’m really happy with this product, it makes removing my creations INCREDIBLY easy! This is seriously a MUST buy for hobbyists!

Wonderful! Hard to imagine I ever lived without it. A couple of tips: keep it clean of finger oils. Take off and flex to just pop off prints, you can place back on without disturbing bed leveling if you’ve upgraded springs

So far so good, easy to install, adhesion is great, easy to remove models. I use an Ender 3 V2, with CR touch and printing has been we been this easy. I used to struggle removing parts off the bed and also getting them to stick but all those problems are gone now. Works great with Overture PETG, PLA, and even Glow on the dark PLA which I was having problems with before. Overall great buy!

I use this on my ender 3 v2 Neo I have never had any problems with this,I wash off with Dawn dish soap and let dry every so often

I bought this to use for smaller prints as I hated that I was wearing out my large expensive pei plate This one works ok but the steel itself is much thinner than my other one. That raises two issues: I have to change my z offset any time I use this. The steel plate can be more easily deformed. I had a couple prints bend the plate away from the magnets during printing due to the print shrinking. So this plate is really only reserved for tiny parts.

This is my 3rd PEI textured build surface, things are sticking well and come up easy when cooled. It is only textured on 1 side, unlike the others I have. One benefit to that is I can always get a heavy duty PEI sticker for that side.

This is an awesome addition on my new Ender. Everything sticks perfectly to the build plate, the bottom finish of the printed part is smooth as can be. Easy release of part when the plate cools. Love it! Much better than the glass ender stock plate.

Excelente empaquetado. Buen material a un costo adecuado.

Amazing bed. Great adhesion and looks good too. Make sure your z offset is right and don’t touch it cause oils from your fingers will affect adhesion. I wipe mine down with 91% isopropyl alcohol. If you start developing adhesion issues clean it with dawn dish soap and warm water

This build plate was working good for a few months, I got this in June. I usually print PETG. Lately Ive been printing ABS and would turn heat up to 100C. This build plate has become brittle from that temp and now there is 2 chunks torn from its surface after a PETG print.