3D Printer Powder Painted PEI Flexi Steel Magnetic Build Plate 235 * 235mm for Creality Ender 3 S1 Pro,Ender 3,Ender 3 V2,Ender 3 V2 Neo, Ender 5,Ender 5 Pro

This plate is a great replacement of the original. I like the gold look too, but you pay more for it. I believe you could find a plate take would perform just as well for half the cost.

Amazing bed. Great adhesion and looks good too. Make sure your z offset is right and don’t touch it cause oils from your fingers will affect adhesion. I wipe mine down with 91% isopropyl alcohol. If you start developing adhesion issues clean it with dawn dish soap and warm water

I was so impressed with the spring steel build plate that came with my Ender 3 S1 I thought it couldnt get any better. The only problem I had was the inclusion of bubbles under the magnetic sheet that was installed on the hotbed, which was affecting my print quality, especially the first layer. The S1 also came with a glass plate so I threw it on just to get by. I searched a bit for a new magnetic sheet and stumbled across this item that happens to come with a new one, so I purchased it, not expecting to use the new plate because the old one is just fine. But I figured Id try it out just to see. What a difference! After taking my time to install the magnet with no bubbles I dropped the build plate on, leveled the bed and started my first print. The first thing I noticed was the adhesion. With the old plate the first string of filament would just peel up as the nozzle passed by it, but not with this plate. PLA sticks right from the start every time. Second, after the print is finished, when the plate is still hot, the print wont budge. But as soon as it cools down you cant keep it in place. I gently lift the build plate off of the magnet and the print slides right off. Of course if it doesnt I just bend the spring steel plate slightly and off it comes. No scraping and scratching, no prying, it just falls right off. Third, the texture is amazing. The surface texture of this plate leaves the bottom layer of the print silky smooth, which looks far more professional than the lines you can see with any other build plate. If you have any series of the Ender 3 with a 220 x 220 build area then this is the first thing I would recommend upgrading. You will appreciate the simplicity and the noticeable improvement in build quality.

I’m really happy with this product, it makes removing my creations INCREDIBLY easy! This is seriously a MUST buy for hobbyists!

I was all excited. I cleaned off the old magnet, got the new one from the kit down flawlessly, leveled things perfectly, did a couple of test cube prints. Everything went great! PETG stuck wonderfully to it. Then I printed a small print with the same PETG Ive been using. It was a bracket for an Apple TV, so not huge. It finished. I let it cool. I carefully flexed the sheet, and pop it came off, but so did a portion of the PEI sheet. With the hole its useless, as its right in the center. Now Im back to cleaning the old glass sheet to get things back up and running. I hope others have better luck than I did.

Faster warm up time than glass and Ive had no adhesion problems at all since i started using it about 2kgs of filament ago. Prints release easy with a slight bend of the plate. The best 3d printer upgrade Ive done yet!

I bought this to use for smaller prints as I hated that I was wearing out my large expensive pei plate This one works ok but the steel itself is much thinner than my other one. That raises two issues: I have to change my z offset any time I use this. The steel plate can be more easily deformed. I had a couple prints bend the plate away from the magnets during printing due to the print shrinking. So this plate is really only reserved for tiny parts.

So this was actually suppose to be my second Creality PEI sheet that i purchased. I damaged the first one while doing mods to my Ender 3 V2. However while this item is listed as a Creality brand PEI sheet, it looks and feels different. See the attached picture where I have previously purchased a Creality branded PEI sheet (left) vs the one on the right that I have received. The Creality logo is missing from this PEI sheet, and the surface is rougher. There were chips in the corner. When i printed on it i had adhesion issues right away and my prints wouldnt stick, compared to my experience with the previous Creality PEI sheet where when it was new it held my prints.

It works great. Would definitely recomend

My prints now have a glass finish on the first layer. Could not be happier with this product! I have an Ender 3 Pro and the plate is already magnetic so no need to attach the included magnetic pad. Easily flexible for simple removal of stubborn prints on the build plate. A little isopropyl alcohol will easily remove any leftover residue unlike the stock plate which was a pain to deal with.