











3D Printer Powder Painted PEI Flexi Steel Magnetic Build Plate 235 * 235mm for Creality Ender 3 S1 Pro,Ender 3,Ender 3 V2,Ender 3 V2 Neo, Ender 5,Ender 5 Pro
-
Agit_66
> 3 dayThis is my 3rd PEI textured build surface, things are sticking well and come up easy when cooled. It is only textured on 1 side, unlike the others I have. One benefit to that is I can always get a heavy duty PEI sticker for that side.
-
Shop Tarts
> 3 dayI bought this to use for smaller prints as I hated that I was wearing out my large expensive pei plate This one works ok but the steel itself is much thinner than my other one. That raises two issues: I have to change my z offset any time I use this. The steel plate can be more easily deformed. I had a couple prints bend the plate away from the magnets during printing due to the print shrinking. So this plate is really only reserved for tiny parts.
-
Kindle Customer 1
> 3 dayDoes everything claimed
-
Chris
> 3 dayThis PEI bed is the best bed I’ve used yet. When printing everything sticks great. When it cools down the project almost basically falls right off. It’s incredible. I will always have a PEI bed from now on. No more scraping! I highly recommend this product.
-
Nathan
Greater than one weekI was surprised to find no official Creality logo or sign of this being an authentic product.
-
Marco Biffi
Greater than one weekI’ve been fighting my glass bed for years until I finally switched to PEI flex plate. It prints like a DREAM. first layer always goes down perfect and sticks great. After bed cools it pops right off super easy. Only regret is not getting this sooner. At this point, this upgrade should be a mandatory.
-
amorg
> 3 dayI like it! Prints fall right off once cool. Im always a little worried print will detach before the print is complete but so far has not been an issue. Will buy again!
-
Luis
> 3 dayThis build plate was working good for a few months, I got this in June. I usually print PETG. Lately Ive been printing ABS and would turn heat up to 100C. This build plate has become brittle from that temp and now there is 2 chunks torn from its surface after a PETG print.
-
Angus66
> 3 dayI purchased this flexible build plate to replace the one that came with my Creality Ender 3 S1 PRO. I was having issues with my prints not adhering to the plate, and I (incorrectly) surmised that the build plate was the issue. My prints failed to stick to this new build plate as well, and the problem was eventually resolved by adjusting my slicer settings in CURA. Now prints stick well to both plates. Although it was ultimately unnecessary, having a spare build plate on hand (if the original ever gets damaged) is worth the purchase price IMHO.
-
Bruce DAmbrosio
> 3 dayWonderful! Hard to imagine I ever lived without it. A couple of tips: keep it clean of finger oils. Take off and flex to just pop off prints, you can place back on without disturbing bed leveling if you’ve upgraded springs