ABN Hollow Punch Kit Leather Punches Tools Hole Punch Set Gasket Punch Set Gasket Cutter 3/16 to 1-3/8in (5-35mm)

(0 Reviews)

Price
$39.99

Quantity
(10000 available )

Total Price
Share
67 Ratings
50
7
2
2
6
Reviews
  • Robert Byrnes

    05-06-2025

    Use for construction and repair.

  • glenn d gibbs

    > 3 day

    Just what I needed. Waited too long to purchase.

  • I.C.B.

    > 3 day

    Bought this so that I could cut some custom carburetor gasket for a machine that is obsolete and Parts are no longer available for. it worked perfectly.

  • Shaniya Schneider II

    > 3 day

    At least 3 of the punches are damaged especially the largest one which was the one I needed the most . The case is dented as well. I would like the set to be replaced as soon as possible.

  • Triple Bogie

    > 3 day

    The quality of these cutting tool are great. Upon arrival you will notice that every piece of hole punch has a burr or the inside along the edge. To remove the burr, I just used a rolled 1000 grit sand paper and used it as a strop to remove the burr edges, Just make sure to only sand away from the burr edge to pull the burr piece back up again or snap off. Once the burr is removed from every hole punch, you will be able to make sharp hole punches if you use the correct bottom plastic punch board and a solid base. If you don’t have a solid bottom heavy base, your hole punches may not get the correct pressure needed for a nice hole punch. I used this punch set to cut into 1/8 thick cowhide leather to make perfect sized holes. I pitched a plastic bottom punch board which feel like a plastic cutting board. For my solid base, I used a 25 all steel weight lighting plate and hit my leather with the plastic.punch board between them. It works flawlessly and the edges stay sharp longer if you remove the burr before using. Takes less than 1/2 hour to de-burr the whole set. I used a cheap rubber mallet with a wooden handle to hit the back of the punch tool. No damages done to the tool and the rubber mallet works perfectly. I rate this product as 5 Stars for quality and value, All it takes is a little de-burring and you set for a long while before sharpening.

  • MICHAEL KELLY

    Greater than one week

    VERY NICE GOOD VALUE

  • K

    Greater than one week

    Used to punch holes in carpet for installation of posts of closet system. Worked really well for something it was not necessarily designed for.

  • James Hughey

    > 3 day

    Excellent value Hollow Punch Kit for making gaskets, etc. Good selection of hole sizes. I really like the center punch feature built into the handle helps make perfect ring style gaskets for auto lamp sockets. J.R. , ASE Master Automobile Technician

  • Gabriel hermosillo

    > 3 day

    After the first use they are dull and wont even cut anymore

  • jared stanfield

    > 3 day

    I use these to make ammo reloading discs, to reload ammo that is obsolete. good buy.

ABN | Hollow Punch SetABN | Hollow Punch Set
ABN | Hollow Punch SetABN | Hollow Punch Set

ABN | Hollow Punch Set

Take the guesswork out of punching accurate washers and gaskets and use the ABN | Hollow Punch Set for leather, copper, plastic, rubber, paper, cork, and any material that is hard to cut with a regular scissor or knife.

A Closer Look

ABN | Hollow Punch SetABN | Hollow Punch Set

ABN | Hollow Punch SetABN | Hollow Punch Set

ABN | Hollow Punch SetABN | Hollow Punch Set

EASY TO USE

Unscrew the bolt head on the top that you hammer on to cut, slide off the rubber grip, and remove the Allen socket screw to allow the spring-loaded center pin to slide out.

SPRING-LOADED

The pin point is spring-loaded and retracts into the handle when punching to create a hole. It is also removable from the shaft so that disks can be cut with no middle hole.

FOR ANY MATERIAL

The inside of the cutter is straight while the outside is tapered. Accepted thickness depends on the material – Foam can be cut about 3/8-inch thick while stiff, metal, or plastic materials can be cut about 1/16-inch thick.

ABN | Bike Tire Changing ToolsABN | Bike Tire Changing Tools

Who We Are

Auto Body Now is a family owned company based out of South Dakota. We have an exceptionally strong Internet presence, sending out over 50,000 products each month. In fact, if you have purchased any of your auto body supplies or car care supplies online, there is a good chance we have had the opportunity to serve you.

Related products

Shop
( 1445 Reviews )
Top Selling Products