ANYCUBIC Wash and Cure Station, Newest Upgraded 2 in 1 Wash and Cure 2.0 Machine for Mars Anycubic Photon S Photon Mono LCD SLA DLP 3D Printer Models UV Rotary Curing Resin Box

This model is large enough to set the Mono X Photon build plate inside the wash container without having to remove the printed parts first. Just got it this morning and already used it to wash and cure some 1/8 scale model motorcycle parts. Works perfectly!

At first I wasnt sure how useful this unit would be however, after cleaning a handful of prints by hand and curing in them in the sun, it became apparent that a better solution was needed. Unpacking the wash and cure station shows how much pride Anycubic takes in their product. If this unit arrives at your place damaged in shipping you just werent meant to have one I guess... The wash and cure station has streamlined my workflow greatly, with WAY less mess! You definitely wont be disappointed.

I don’t know how I cleaned and cured my prints before this. This machine makes it so easy to wash, dissolve excess resin, and cure to a finished state. I can’t see me 3D printing without it.

This machine works perfectly, helps a lot to clean and cure the parts. Is very easy to use and simplify the work. Have to modes wash or cure and you can set the timer. The container has a part to place the print bed directly and be easy to clean. Am very happy with this machine and I definitely recommend it for the cleaning and cure process easier fast and friendly.

So my Anycubic Wash and Cure station came in yesterday and I was eager to try it, especially since I have heard great things about it. So I loaded up a print on my printer and as soon as it got done printing I was able to take it off my build plate because I have an Elegoo Mars and not a Photon so my print bed doesnt fit, but that doesnt matter because I was able to put my print in the basket. I did find out that you have to have the lid on for it to work as a safety(Smart!) took me a minute to figure that out lol. Long story short this machine cuts down your time and mess cleaning resin prints and is well worth the coin. If you run a 3D printing business I highly recommend getting one, you wont be disappointed.

While a dedicated ultrasonic cleaner might be slightly better at removing uncured resin, this does a fine job and adds the benefit of a cure light. 2 functions in the space of one.

Saves me the headache of going from wash to cure station. Cuts down on the mess. Looks sleek next to my printers.

The Anycubic Curing/Washing Box is the perfect companion for ANY hobbyist printer out there. The biggest con to me with resin printing is the post production washing and curing, it can be a messy endeavor. With this machine, it takes so much of that pain and washes it away. The unit is well built, and works perfectly to clean and cure your resin prints. I couldnt wait to get my hands on this unit and it did not disappoint, everything was well though out, including a proper lid/seal for the washing container to prevent spills and to keep the odour of the rubbing alcohol (will be moving to water based resins very soon, so resin printing will be even more enjoyable in the near future). Get one of this units if you are resin printing, it makes the hobby just that much more enjoyable and reduces the amount of time required to clean and cure. I will update this review as I get more time use it, but I have washed and cured almost an entire bottle of resin worth already and have not had any issues.

This one device replaced a couple of post processing steps. I would typically burn through gloves removing the prints from the base plate. Paper towels to wipe up drips, paper towels to wipe up the base plate. Gloves to move the prints from the iso to the sink. Scrubbing prints gently with soap and water. Placing them into my uv chamber. I have reduced my contact with resin and iso and post processing has become relatively painless… except for removing supports. I print with a Elegoo Saturn so I printed some clips to sit in the corner of the top and bottom shelves (wash and cure plus corner for Saturn on Thingiverse). I will keep updating as time passes as I’ve only had it a few days. Probably print some handles for the cover.

This has made cleaning and curing my parts much easier and faster. Since it does both, it takes up less space than my cure box and my many pickle jars of IPA. The machine has 3 preset timers for both cleaning and curing which is great for my large and smaller prints. Highly recommend getting one!!