ANYCUBIC Wash and Cure Station, Newest Upgraded 2 in 1 Wash and Cure 2.0 Machine for Mars Anycubic Photon S Photon Mono LCD SLA DLP 3D Printer Models UV Rotary Curing Resin Box

Very easy to use ..

If you are resin printing without this machine you are doing it wrong. Zero mess, resuse Alcohol, professionally cured prints in minutes. The machine takes 2 minutes to figure out very easy to use.

Anycubic did a good job on this design. The wash station bucket even came with a spare bearing for the impeller blade. The cure side works great. Well done Anycubic!

So my Anycubic Wash and Cure station came in yesterday and I was eager to try it, especially since I have heard great things about it. So I loaded up a print on my printer and as soon as it got done printing I was able to take it off my build plate because I have an Elegoo Mars and not a Photon so my print bed doesnt fit, but that doesnt matter because I was able to put my print in the basket. I did find out that you have to have the lid on for it to work as a safety(Smart!) took me a minute to figure that out lol. Long story short this machine cuts down your time and mess cleaning resin prints and is well worth the coin. If you run a 3D printing business I highly recommend getting one, you wont be disappointed.

It’s a very simple machine but it makes it a lot easier to cure and wash Resin prints without having to have a DIY cure station

This is an outstanding machine that will take your resin print quality and resin printing experience to the next level. This machine is very well built and easy to use. It is high quality for sure. I did not have this machine for my first few resin prints. Cleaning and curing the prints were a mess. It was not a fun process and it took a lot of time. It was difficult to get my prints cleaned properly so they would be cloudy after curing. I decided right then I needed to invest in the Wash and Cure Machine. Every print I have done since I have had the wash and cure machine has turned out very well. It makes the post processing so much easier and quicker. You can wash and cure your prints in minutes. My prints come out super clean and not cloudy. Just clean and green. I love this machine and highly recommend it to anyone who is resin printing. It just takes the print quality and experience to the next level. 5 Star product in my opinion.

I saw the Wash and Cure 2.0 reviewed and I loved the build plate sitting in the rack so you can clean the plate and parts simultaneously. However, it did not work with my Photon M3s build plate. I have to remove the parts because the build plate is too big for the wash tub, and the M3 can print parts too big for the basket. Ill have to modify it to get large parts in the basket.

Cleans my prints right up and cures them perfectly. So much better than doing those things manually.

Got it on sale and it is of top notch quality for post processing! You could get the same effect with a DIY curing station admittedly but you are paying for convenience and finish

I have a very small work area so this was a great companion for my Epax X1. This has made the shift to resin so much easier because it helps keep my space organized, tidy, and safe. Its not going to be for everyone and thats okay, but for me its worth every penny.