ARCTIC MX-4 (4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive, Non-capacitive
-
P. Byrne
> 24 hourThis is a great thermal paste which can breathe new life into old computers or devices and reduce noise levels by increasing thermal performance. Ive use the MX range for years and its always been great. Decent amount in the tube, as it should be used sparingly.
-
Jullymar Torres
> 24 hourSuper good thermal
-
Zekeriya Güler
> 24 hourHabe die für die ps4 pro gekauft und ehrlich gesagt hat es ein Wunder bewirkt kann ich jedem empfehlen
-
Mario Gracia
> 24 hourLlego muy rápido el producto es de lo mejor para bajar la temperatura de los procesadores. Buena calidad/precio
-
Recensore casuale
> 24 hourIl prodotto si presenta bene però la confezione è un po scarna e chep. Ciò che conta è il contenuto che alla fine non è poi cosi male. La pasta termica infatti è di buona qualità e ciò permette una buona applicazione e dissipazione del calore. Il punto negativo che mi sento di fare sta nel come applicare questa pasta dal momento che mancano sia istruzioni che indicazioni e tutto ciò viene lasciato al libero fare dellutente che prima deve informarsi.
-
Claudia
> 24 hourLo usé para la placa de mi ps4 y dejo de hacer el ruido que hacía. Todo correcto
-
Alejandro
> 24 hourTuve las bolas de cambiarle la pasta termica al portatil, y por ahora tira bien la pasta termica sin ningun problema
-
luca
> 24 hourok
-
Neunkirchen Heinz
> 24 hourSuper gut Qualität gut Preis ok zu empfehlen würde ich wieder kaufen
-
Kelsey Sphar
> 24 hourI ran out of my MX-4 from 2013 while reapplying thermal paste on my 980ti, and the difference in replacing old compound with new was staggering. Temps went from 78-82 C under load with stock settings to 67-68 C under load with moderate overclocking!
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
Related products
