

Atwood 93868 Water Heater Replacement Parts - Spark & Sensor Electrode, 2-Prong (1)
-
Joe Arwood
> 3 dayWORKS GREAT!!!!
-
insagor
Greater than one weekSimple to install. I was replacing the unit in my just acquired RV, which didnt look like this one. Someone had kluged a different igniter so replacing mine was a little more complicated, as I had to find screws to work with this unit. Not a big deal and not the fault of the supplier/product, but of the PO. Works as it should. Just make sure if you have multiple holes where yours mount, to make sure and identify which hole is being used to mount back in the same hole.
-
Brian M.
13-06-2025Completely different connector than in the image .. waste of time
-
Donaho
> 3 dayIt just didnt work No spark.
-
Frederique Mayer
> 3 dayOur Atwood GC6AA-10E water heater would go through 6 to 8 start ups, where it would spark, light and burn for 2 seconds and go out. Then after that it would start and work. But it would fail again. after overnight cooling off. Guessed that there was no milliamp voltage from electrode. being fed back to control board to keep the gas on after lighting. This new electrode seems to have solved the problem. Starts like a champ now. Lucked out it was not the board.
-
Chris
> 3 daythe PROTECTIVE rubber boot on this item is not the correct one and it will not fit your water heater. Also the porcelain tip does not have a seal as the original does. It is not the same item as in the picture it is a very cheap knock off that will not work correctly. Such a waste of my time to sell items that are misrepresented.
-
Allan Newton
> 3 dayThe part was identical. Install quickly
-
Anthony S. King
> 3 dayAs advertised and quick shipping
-
dennis
> 3 dayDid the job and still working
-
Michael Stewart
> 3 dayEasy to install. Fixed my problem. Perfect fit.