Benchmark Abrasives 5 Aluminum Oxide Quality Thin Cut Off Wheel for Metal and Stainless Steel 0.045 Thick 7/8 Arbor, Angle Grinder Wheel, Fast Burr-Free Cutting Wheel - 50 Pack
-
GMusik
> 3 dayFor 50 of these 5 metal cutoff wheels at my local hardware store, Id be paying nearly $250! Im not sure how these are so inexpensive, but I just received them and the quality appears to be identical to the ones I normally buy. I will update my review after some actual use in the field, but I have no reason to expect them to perform any differently than the ones Ive been using. As typical with every brand of cutoff wheel Ive used in the past, the actual thickness is greater than advertised, but not too far off. These are advertised as 0.045 and the actual thickness is 0.0560 (1.42mm)--see my photos. The other brand I was using before this that also advertised 0.045 but measured over 0.060. EDIT: After using these in the field now, Ive had absolutely no issues. They work just as well as the ones I was paying much more for.
-
Bearded beast
> 3 dayThis is a regular item for me definitely buying it again
-
Loren Mensing
> 3 dayGreat product
-
Jason
> 3 dayThese are the best wheels I have used. Ive ran all types of brands being in the heavy equipment repair industry. They last the longest and you CANT beat the price.
-
Christine Garrett Adkison
> 3 dayGreat cutting wheels for the money. Long lasting and durable.
-
rv4pilot
> 3 dayVery good value! Cuts great and lasts at least as long as any I’ve used at a fraction of the price!
-
johnnyD
> 3 dayTough to beat these for the price; they perform well.
-
Lisa Dickinson
08-06-2025As one should except a good product for those finer cuts
-
Keshaun Pacocha
> 3 dayThese are fast cutting & wear for a long time these will out last most brands 3 to 1
-
BOB KILLION- BKSTEEL
> 3 dayIve used a lot of cutoff wheels, and these really do well if you used them correctly, they will bounce around a little if you try to plunge and dont hold still, but once in they cut great with little wear. Im happy.
|
|
|
|
|---|---|---|
Best Cutting FinishThe heat-treated premium aluminum oxide grains helps in quick cutting and maintains high durability. The ultra-thin design helps in maintaining the balance while operating on metals with grinders, eventually providing a precise cutting to the metals and an effortless experience of metal cutting. |
High on EfficiencyThese discs have the best strength, high cut-rate, bonded abrasive discs used for cutting metals including steel, cast iron, and stainless steel. The cutting disc is designed with double reinforced and sturdy fiberglass backing to be used regularly which also protects metal from shattering and provides higher resilience to the metals. |
Wide Metal ApplicationsUsed for general purpose cutting of stainless steel, carbon steel, aluminum. Fast cool cutting allows the operator to work with minimum pressure. Reduced heat affected zone during cutting minimizes burr creation. Its highly refined ingredients will not contaminate stainless steel giving it a long-lasting and perfect finish. |
|
|
|
|
|
|
|---|---|---|---|---|---|
| 5"x.045"x7/8"-Quality Thin CutOff Wheel Metal & Stainless Steel | 4.5"x.040"x7/8" Depressed Center Thin Cutoff Wheel - 50 Pack | 100 Pack-4.5"x.040"x7/8" Quality Thin Cut Off Wheel Stainless | 100 Pack- 6"x.045"x7/8" Quality Thin Cut Off Wheel Stainless | 4.5"x.040"x7/8"- Quality Thin Cut Off Wheels Metal & Stainless Steel | |
| Pack Size | 50 | 50 | 100 | 100 | 50 |
| Material | Aluminum Oxide | Aluminum Oxide | Aluminum Oxide | Aluminum Oxide | Aluminum Oxide |
| Diameter | 5"x.045" | 4.5"x.040" | 4.5"x.040" | 6"x.045" | 4.5"x.040" |
| Arbor | 7/8" | 7/8" | 7/8" | 7/8" | 7/8" |
| Max RPM | 12,000 | 13,000 | 13,000 | 11,000 | 13,000 |