CanaKit 3.5A Raspberry Pi 4 Power Supply (USB-C)

The best power supply for my hotspot, NO ..NO whine noise. Very clean transmission.

I purchased this power supply for my own use on USA 120 Volt, 60 Hz power. This power supply has a cord with a USB-C connector which plugs directly into the power input of a Raspberry Pi 4 or Nvidia Jetson development board. The output current is rated up to 3.5 Amps, which should be more than needed for most situations unless a HAT requiring a lot of current is attached to the board’s expansion header. This power brick is sealed, so short of destructive disassembly the quality of the internal components can’t be examined. What can be said is that the brand name is well known, so there is a stake in assuring quality of construction. The blades that plug into the wall outlet are offset towards one edge, thus in most cases this power supply and another cord can be plugged into a standard duplex wall outlet at the same time.

Supplies enough current, more than long enough, the brick doesnt get hot at all.

I purchased this because I have a Raspberry Pi 4 coming and I don’t have power adapter that has a USB type C connection. I notice that this adapter has an output current of 3.5A available vs the 2.5A used by Raspberry Pi 3+. Its output voltage is biased up slightly from 5V to 5.1V, probably to allow for cable and connector losses. I am glad to see that this has the UL mark and the box within a box double insulation mark. I am pleased with this purchase. One thing I wish it had was a switch to turn it on and off. I hate unplugging the connector to do that.

didnt work even though I search for my devices model number. found out it was not compatible even though it plugs in.

The specs state this is compatible with the Raspberry Pi 4 but I have a 4 B and the raspberrypi.com website states 15W is required.

Good

So this charger was purchased for my ipad 12.9 pro. The charger I had previously would take a full 8 hours to charge it and you could never charge it while using. So I bought this thinking it would charge faster. It wont even charge while plugged directly into the ipad. I do have a audio/power dual input cable so you can listed to headphones and charge it at at same time for the ipad and plugged it in that. It got very hot but charged in like a hour. It will charge our phones pretty fast also. I wont be using this charger for the ipad, it is obviously not compatible. But I am going to see about the nintendo switch. I bought 3 chargers because they were such a good deal. I not only have found them useful even though it doesnt work on the one device.

A great power supply for the new Raspberry Pi 4 which requires more power and a different plug. A well known name so it should be dependable. I highly recommend this product as it works great.

Good power supply can power pi 4 well