Cooler Master MasterCase H500M ARGB Airflow ATX Mid-Tower with Quad Tempered Glass Panels, Dual 200mm Customizable ARGB Lighting Fans, Type-C I/O Panel, and Vertical GPU Slots (MCM-H500M-IHNN-S00)

This case it the best. I love the looks of it. I love the large 120mm fans. I love the mesh front. This thing is a great way to take your build to the next level.

There was a lot of thought put into the versatility of this case. You can swap a mesh front panel with a tempered glass panel. You can remove a cutout to expose your power supply. You can remove another cover to allow you to front mount a 360mm radiator if you choose. One of my criteria was that I needed at least 380mm of radiator bracket space on top to mount my Alphacool Eisbaer 360mm AIO. The end tanks on this rad are larger than most, necessitating approximately 380mm of lengthwise mounting space. Most cases that advertise the ability to top mount a 360mm rad are very difficult to actually get it to fit while having the clearance for your RAM and the rear I/O shroud on the motherboard. The H500M, with its removable radiator bracket and spacious domed top panel makes mounting even the largest and thickest of 360mm radiators a breeze. You could even do a push/pull config if your fans arent too thick. The included 200mm intake fans, while being only 3 pin fans and operating at a single speed, are virtually silent while also giving you aRGB functionality. The included adjustable GPU bracket is a nice option too as well as the water pump mount. On the back side of the motherboard tray, there are three removable wire covers that help clean up unsightly cables. These trays could be a little deeper to give you some additional clearance, but I got them to fit back on nonetheless. I would give overall wire management a 7 on a scale of 1 to 10. It would be nice to have some cable port grommets like most Fractal and Phanteks cases do. And it would be nice to have some port holes in the top of the PSU shroud so you could route your 8 pin GPU cables from directly below. Overall this is a terrific case, and the overall quality is better than average. Any price below 200 dollars is a good deal IMO. This case does what good cases do, it gives you the option to be as creative as you want to be with your build.

I did a lot of research for this build and I wasnt disappointed with this case. Easy unboxing, simple directions, lots of room for tall brick coolers like the Nactua or Be Quiet Dark Rock (dry fit pic for brick cooler. 6 mm to spare before glass ). So many options for fan sizes, liquid coolers and locations. Did I say this thing looks great?! This was more like a gift from the hearts of the Cooler Master designers than a purchase. It breathes big and thats why I went with it. If youre thinking of over clocking, please Youtube for the stats and reviews. youll see very good numbers just with the stock fan set up. There are so many features to talk about that are great and you really should check out the reviews but, I do have one issue. This cant be blamed on Cooler Master, after all, the price is so well worth it. The fans are RGB but they arent PWM 4pin, meaning, they do not regulate speed like the CPU coolers do. Your mother board more than likely supports PWM fan regulation so, maybe that is something you would think about as an upgrade. 200 mm RGB PWM 4pin fans are more expensive and wouldnt easily pushed the price up for this case. Regardless, its still pretty quite as it is. Im so pleased with this choice and already thinking of a new build around another one of these cases. Do your research, find out for yourself and enjoy.

Ive happily used Cooler Master cases since the HAF, but was disappointed with the H500s airflow when I switched to it in 2017. However Im glad to say Cooler Master regained their footing with the H500M. It keeps my favorite things about the H500 design, and greatly improves several shortcomings I had to deal with. The top panel no longer sits loosely on the case so if I needed to carry the case out, I can do so without having to take it apart or worrying about dropping it. The top radiator/fan mount is now 360mm instead of 240mm max so I was able to mount a larger radiator for cooling. It has a USB C port on the front, FINALLY. Theres even a discreet built in GPU mount for the saggiest of video cards. But most importantly of all, this thing is an AIRFLOW BEAST. 10900k at 5.2 sits around 50c on full load, 3080 doesnt go past 65c on full load. With the newest GPUs pulling so much power its more important now than ever to get a good airflow case. If you liked the style of the H500 but were turned away by lack of airflow, the H500M is the case for you. My one con, if I had to say something, would be that although it supports EATX just fine, the cable shroud you would usually tuck your 24 pin behind sits flush with the side of the 24 pin terminal on my motherboard, at least. I was able to route my 24 pin extension around to the other side of the shroud in an aesthetically pleasing way so no real issues. Just keep that in mind. Other things about this case worth mentioning: The dual tempered glass side panels make this case heavier than normal but it gives it a nice symmetrical look and sheen. You wont have to worry about errant cords being visible through the glass because with the entire H500 line there are several wire panels that hide your mess, keeping that nice clean look no matter how much your cable management sucks. The top panel is still not meshed except for side vents but there is noticeably more headroom between the case frame and top of the panel allowing for excellent exhaust flow. The two front 200mm fans are markedly improved from their H500 versions, with more LEDs and quieter bearings. The PSU and HDD shroud below can be configured in many ways, but if you have a 360 radiator for the front intake and want to keep the shroud, there is fortunately a slot that pulls out from the front enabling that particular configuration. Its listed as a mid sized tower and it is, but the H500M is large for its class. Roughly 22 inches tall, 21 inches deep. Its main feature is excellent airflow, but the H500M should be noted as being a very modular case, and can accommodate many kinds of builds. I was almost tempted to go custom loop because of the built in pump bracket and space for two 360 rads.

I replaced my 8 year old Nzxt Phantom case with this fantastic piece of equipment, and what suprized me the most has got to be those 200mm fans and how effortlessly they push air through the case at such low rpms. Half of me was honestly expecting them to be very gimmicky and mediocre, boy was I suprized and at full rpm they push some serious air.

I dont care for case. I have an old Antec which I am satisfied with. But this H500 is epic. Evolution happened for a very good reason for this case. I loved almost every aspect of this case. And I am completely satisfied. I was hoping to go with mini-ITX and make case disappear. But I am gladly I ended up with H500. 1. Light. It is a HUGE case but it is still light. That is important. 2. Handle works. Handle was of the key feature I was looking for. This has handle and not just for cosmetics, it actually is usable. And it does not stick out. 3. 200mm fan. It is wonderfully quiet and well integrated. Best fan I have ever come across. 200mm if you have to build such size is AWESOME. It is running around 400-500rpm. 4. Real glass side panel. I dont care for looks much. But this glass screams I am fancy. It is real heavy glass. It adds most to the case but whole case isnt heavy so the look and feel of real glass adds much more than its weight negatives. 5. Cable management. It can be improved but I had so much fun cabling this. It has plenty to tidy up your cabling. I wont be spending any money with ARBG and other fancy lighting but I enjoyed with what came with. 6. Power button and front USB. I had older case and the placement of power button and USB made this case so much more comfortable using it. H500 is in short supply. They want $150 for this $100 case and again market is correct. It is worth $150. But I wouldnt spend that. I bought used and it came with one faulty back 120mm fan. nothing $5 wouldnt fix. I wont blame Cooler Master for it. H500 is AWESOME CASE. HIGHLY RECOMMENDED.

This case is amazing in nearly everything besides a few cosmetic issues Ill go over later. First a rundown of specs, some results and my opinion. Ryzen 3800x/Gigabyte X570 Aorus Pro Wifi/32gb 3600 Corsair Vengeance Pro RGB/EVGA 1080TI Hybrid SC2/Scythe Mugen5 CPU fan/Sabrent Rocket NVME PCI4.0 1tb/Win10 Pro/Added a little bling/cooling with 2 LLSeries 120mm Corsair Fans for the top exhaust. Pros: Easy to build in - lots of room for all my components, great cable management, RGB front intake fans are quiet and were plugged in very easily, the most silent PC Ive ever owned, keeps my PC cool - CPU Idles around 36-37C and peaked (so far) at 68.6C. GPU hit 59C max (so far). Cons: This is just a nitpick and is probably just my case, but the paint job is sorta fragile. I was very careful building this PC and just screwing in the radiator to the back of the case caused some paint to chip off. Its ok since its behind the screw and cant notice it. Another obvious con is the glass panel is a total fingerprint magnet, but yea its worth the extra cleaning for the looks. One thing I want to mention is the included clear front panel looks nice but will severely decrease airflow and is not recommended to use unless you live in a really cold climate. Keep the mesh front panel on. None of these are worth taking off a star imo. If youre on the fence on this case, Id say get it. It has the best combination of looks, cooling, and price. My pictures dont do the case justice. Tons of people complaining about high temps on their Ryzen 3000 series CPUs. This case combined with an aftermarket cooler will keep your CPU nice and cool. Couldnt be happier with this case. Edit: Well for the last 3 weeks I didnt like my temps on my GPU. Its got an AIO cooler, but with the rad on the exhaust fan spot on the case it was basically taking in all the heat exhaust from the CPU cooler. Would cap out at around 58-59C which is well within temp limits, but not normal for this card. After re-arranging the temps are way better accross the board and the GPU temp dropped about 8-9C just put moving the rad up top as exhaust. (1st 2 pics have rad setup as rear exhaust, last pic is with the rad on the top)

H500M is expensive and does not deserve to pay that. I returned it and Im much more happy with H500. 500M has some nice features like graphic card support or 3.1 input but those do not justify to pay extra $150. Besides it doesnt feel that sturdy when you try to pick it up, no handle like H500 has. Rights side has glass side as well but for what?? That creates extra burden for doing cable management. Id buy H500 even if I could afford H500M. I love the handle of H500, so easy to carry around. Top magnetic filter looks amazing. Interior is almost identical to 500M, critical difference would be H500M has 140mm and H500 has 120mm fan. I replaced that 120mm fan with RGB anyway. I bought used from Amazon warehouse and was nervous till it arrived and I installed the whole thing and upper fan did not light , I thought it was busted but then I opened the case again and checked carefully and saw that it was just an RGB cable unplugged. Other than a small dent on one side -hence the price was cheap- which I dont care, I am very much happy with it!

For 100 dollars, this case really is one of the best out there. You get a full fan layout (2 front fans, 1 rear fan). It comes with a PSU shroud as well. The tempered glass is very high quality. There is plenty of room in the back for cable management, and the back panel has a great mounting mechanism with two thumbscrews. This case also comes with some accessories like an RGB controller and zip-ties for cable managing. When it comes to airflow this case might be the best performing. The two massive 200mm fans on the front pull a tremendous amount of air through the case, while still being quiet. The design is quite nice as well, with a handle for moving it around. There are two dust filters, one for the PSU and one for any top mounted rads/fans. Overall very, very nice and worth every penny. The only con I can think of is how the tempered glass panel is held on by slotted screws instead of philips. Still pretty easy to tighten though, can be done by hand. But I think the fact that the panel has a resting ledge so it does not fall off when you unscrew it makes up for the odd screw type. 10/10 would buy again, and probably will for future builds.

The disk holders for my Corsair mini case literally disintegrated. It was far too small a case in the end. Too little space above the MB for a radiator, too little space behind it for cabling, and I found myself opening it and closing it so often that I started to lose case parts I could not replace. The front fans of this model are true ARGB, which worked directly with my MSI motherboard. I used the enclosed ARGB controller to cheat and create a second ARGB zone, instead of for the front fans. PC is dead silent except for GPU fan noises, which is not the fault of the case. In the pic above you see 3 additional Cooler Master 120 mm ARGB fans, the two on top are attached to an EK radiator. The CPU block is Phantek and the green inner light is coming from 2 LED strips from Airgoo