Creality Capricorn Bowden Tubing 1M, Bowden PTFE Tube for 1.75mm Filament with Teflon Tube Cutter, 2X PC4-M6 Extruder Fitting & 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 Pro/5/CR-10/10S 3D Printer

Great for my 3D printer

I purchased and received the replacement tubing. I have an ender 3v2. One of the biggest problems with it is the potential for a piece of PLA to break and get jammed. I had this happen on a 6 month old printer. I have an older model (ender 3v2) and I just took the tube assembly off it and replaced the one that was jammed. It has worked fine for several months but the tube started to come out of the joint…..so I replaced the joint (metal piece that screws into feeder). However a piece of PLA broke off in the tube and I had to replace. The boden tube had to be cut and the included cutter worked well. I just lined it up with the old one and cut a similar length. Do not try to use the old joints (metal pieces), as it seems they are one time use pieces. The boden tube comes with 2 sets of metal joints (each set has a hot end and feed attachment). The pieces that come with this set are far superior to the OEM metal pieces and they do not require the small blue clips. The The tubing has to be released from the hot end which required me to take the black cover off, the. Remove the tube from the hot end. The new tube (that I previously cut), fit nicely into both sides with the new metal joints. And I used 2 zip ties to hold the tube to the wiring harness that goes to the hot end. After installation, the first filament that I fed in seems to feed much easier than before. And the spool was a white that I had trouble printing before, and it printed great the first time. I will continue to use, but it seems like my replacement would also serve as a nice upgrade as well.