









DEWALT DW8311 4-1/2-Inch by 5/8-Inch-11 36 Grit Zirconia Angle Grinder Flap Disc
-
Mack W4MAC Walls
Greater than one weekGreat addition to the welding cart, works as described.
-
RT
> 3 dayGreat grinding/sanding flap disk. Long wear.
-
Neil Spring
> 3 dayIm writing this review because I tried the alternatives. I wanted to strip the paint off my deck (I didnt paint it), and started with the deck stripper chemical (which did well). For the parts coated too thickly with paint for the stripper to work, I tried various wheels that attached to my drill (ineffective), the random orbit sander (blew through discs and wouldnt fit everywhere), then the angle-grinder sanding discs with a separate quick loading adapter (flat discs were too hard to control). This 120-grit disc took off just the right amount of material (a bit more aggressive than 60 grit on a random orbit sander) without a lot of scratching. It lasted through everything I wanted to sand: especially all the vertical surfaces under the deck and stairs, and between balusters. Really useful and efficient.
-
Djordan
> 3 dayWorks well got the job done .
-
topcat77
> 3 dayI sculpt with metal, mainly found steel, and use flap discs in the finishing process often on very rough surfaces. These discs are workhorses, work rapidly and produce fine finishes
-
Jc8402
> 3 dayProduct works good the only things is I received one that screws on the grinder it self not the one in the picture
-
Laken Green
12-06-2025Love these wheels that just screw on. You dont have to mess with taking the locking nut on and off of grinder. Used these pads for years and always loved em. They last surprisingly long. Wont ever get another brand of flap discs. DeWalt cutoff wheels on the other hand, leave a lot to be desired.
-
0xDEADBEEF
> 3 dayIt works, nothing too special. I find the cheaper Home Depot discs just as effective. I am using it to take off old paint on a steel toolbox.
-
Craig C
Greater than one weekI have always used these types of grinding discs for cleaning up metal surfaces. They dont chatter and when light pressure is applied the surface is polished. They work better and last longer is pressure is kept to a minimum so the work piece doesnt heat up, even just the pressure of the grinder is enough as these discs remove material quite fast.
-
Tim A
> 3 dayHighly recommend over lower priced disks, this will outlast all the cheaper disks by a long shot. Works great have used quite a bit and still looks new