Evergreen CECOMINOD073162 GE • Genteq 1/3 HP 230 Volt Replacement X-13 Furnace Blower Motor

Old X13 motor just stop working properly. When it would come on it would just spin slowly and stop so from looking around I knew it was the module on the back. I decided to order this one after research. This is a simple plug and go. The motor does come with new wiring, but there is no need to mess with that if your using this motor to swap not an X13. Just replace and plug this new one in and you should be all set. When you do turn your ac on the motor will spin forward and backwards as it is programming itself.

None

Replaced my KMSAH014C01 Broad-Ocean motor/ fb4cnp030l00aaaa (Rheem) | 208/230v 1/3hp / air handler Put wires in same spot / up and running with in minutes.

Blower motor on a Bryant Central Air Conditioner Model FB4CNF024T00ACAA went out on a Sunday afternoon. OEM part was $500 and wouldnt be in stock for a week. According to the fact sheet on regalrexnord.com, their Genteq Evergreen EM 6203E was a compatible replacement and was half the price and Prime shipped to my door in 2 days. Took a couple of hours to install, most of that spent battling the belly bands infuriating nut/bolt placement that was almost impossible to loosen or tighten because of how little room there was to fit in the required two wrenches. I basically could move the wrench about 1/64th of an inch before I ran out of space and had to reposition it, all the while banging my knuckles on the rough cut sheet metal edges of the housing. However once in the housing, the rest of the install was a cake walk. The motor comes with a very nice instruction booklet and an extra harness that extends the connections that control the fan speed. This is nice because you may have to play around with which connections to use depending on how the old blower motor was programmed and the harness puts the connections in easy reach instead of having to slide a hand between the motor and the wall of the air handler where space is tight. I just used the same positions as my previous motor used and it worked fine. There is NO programming needed for the Evergreen motor to work, it even auto-senses the correct rotational direction of the shaft the first time it starts up. Sitting in my icy cold room as I type this, I cant think of anything negative to say. As you can see in the picture, the only differences between the OEM motor and the Evergreen is that the shaft is a little longer and the connectors are on the housing rather than extending on a harness but, like I previously mentioned, they do include and extension harness specifically for the speed connectors. Will try and remember to update this review in the Winter when I kick on the heat cause I sure aint gonna test that right now! Oh did I mention I probably saved myself $1,000 bucks doing it myself and got it done a heck of a lot faster!!

Works good so far

Outstanding replacement for ECM X13 motor at a great price. Contacted Evergreen technical support to ensure motor was compatible with the one I was replacing and they were extremely helpful; purchased with confidencet. Connectors from original motor matched perfectly with connectors on this motor, even though there was a warning sticker stating that they may not match up. Couldnt be happier doing it myself as it saved me hundreds of $$$ if I would have contracted someone to do the job. I definitely recommend this product. Thank you Evergreen!

We have a York AC/Heat Pump Model AHX30B3XH21 YHJF24S41S1 made in 2009. The blower stopped working although we did not use the AC unit very often because it is for the sun room facing the north. The OEM motor would cost $690. This blower motors spec matches with the original. So I ordered it online. The repairman was able to replace the motor in about an hour. Now the AC unit works properly. I am glad that this product is available through Amazon.

Part arrived on time and was well packed so it arrived in good condition. I was surprised to find a complete set of installation instructions as well as a new wiring harness. These were not listed in the online description of the item. I am a very handy DIYer and found the instructions easy to follow when comparing their diagrams and directions to my own pictures of the wiring (before I removed anything).

Well documented. Comes with speed selection harness & a generous handful of insulated spade lugs to add to your toolkit. While the color code for the Evergreen wiring is different, I found the motor to be plug & play compatible with my old Genteq harness. I only needed the second of five possible speeds to balance the system. Also, the motor automatically senses and adjusts the rotation direction for your blower at startup.

Worked just fine.